
The AirTAC SEJ Adjustable Cylinder SEJ80X40-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 0–40mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X40-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm adjustable stroke window. You can dial the retract end from 0 to 40 mm via a back-rod stop screw, allowing precise on-machine end-position tuning without changing hardware. A rod exits both ends, ensuring equal force and speed in both directions at 2268 N each way at 0.5 MPa.
This 80 mm bore cylinder uses PT3/8 ports and a Ø25 mm rod with an M20x1.5 thread. It includes a built-in magnet for CMSE or DMSE sensors and field-adjustable air cushions at both ends. The extruded aluminum barrel omits external tie rods, and the mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X40-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 40 mm |
| Adjustment window | 40 mm (0–40 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 0-40 mm end position during press commissioning, leveraging the 2268 N both-way force to seat components precisely without hardware changes.
Adjust the retract stop on the fly to accommodate different carton heights, using the equal push and pull forces for consistent folding and sealing operations.
Fine-tune the clamping location on a machining fixture, utilizing the M20x1.5 rod thread and adjustable cushioning to handle varying part dimensions safely.
The 40 mm adjustment window lets you cover a 0-40 mm effective stroke range, ideal for commissioning fine-tunes or matching variable stops. If you need less force, the 63 mm bore provides 1402 N at 0.5 MPa; if you need more, the 100 mm bore yields 3681 N. If your stroke is fixed, a standard SED cylinder is sufficient. Remember, the air cushion and stop screw only set the mechanical end and decelerate near stroke end; they do not hold position on air loss. For fail-safe holding, use an external rod lock. Replace by matching the 80 mm bore, 0-40 mm window, PT port, and mounting code.
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke within a 40 mm window, giving an effective stroke range of 0 to 40 mm. You lock the screw after setting the desired end position.
Because a rod exits both ends, force is equal in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.