
The AirTAC SEJ Adjustable Cylinder SEJ80X50-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 40–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X50-10 is a double-acting, double-rod ISO 15552 profile cylinder with a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas and an equal drive force of 2268 N each way at 0.5 MPa. The integrated stop screw on the back rod provides a 10 mm adjustment window, creating an effective stroke range of 40 to 50 mm.
This SKU omits the piston magnet, so it does not support CMSE or DMSE position sensors. The extruded aluminum barrel has no external tie rods, and adjustable air cushions at both ends decelerate the 25 mm rod near stroke ends. It is dimensionally interchangeable per ISO 15552.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X50-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 10 mm (40–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 40-50 mm clamping depth on a light press. The 2268 N both-way force secures the part, while the 10 mm stop screw window allows precise end-position tuning without swapping cylinders.
Adjust the retract distance on packaging lines handling varying carton heights.
Mount a cam or flag on the rear rod to trigger external proximity sensors. The 10 mm mechanical adjustment lets maintenance perfectly align the trip point during machine commissioning.
Verify your end-position tolerance fits within the 10 mm retract window to use this 80 mm bore effectively. If you need less force, the adjacent 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N both ways. If your end stop never changes after commissioning, a fixed-stroke SED cylinder is sufficient.
The PT3/8 ports and 25 mm rod handle substantial loads, but the air cushion and stop screw only set the mechanical end and decelerate near stroke end—they do not hold position on air loss. For fail-safe holding, specify an external rod lock. Match ISO 15552 replacement dimensions by confirming the bore, stroke, port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 10 mm. This gives an effective stroke range of 40 to 50 mm. You set the exact end position during commissioning and lock the screw in place.
Because the rod exits both ends, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.