verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SEJ Series · ISO 15552 Adjustable-Stroke Cylinder

Airtac SEJ Adjustable Cylinder SEJ80X50-20S

The AirTAC SEJ Adjustable Cylinder SEJ80X50-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 30–50mm without changing cylinders. Force is equal in both directions.

  • BoreØ80 mm
  • Nominal stroke50 mm
  • Adjust window20 mm
  • Effective stroke30–50 mm
  • Port sizePT3/8
  • CushionAdjustable, 36 mm
$146.06 $153.56Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SEJ80 stroke, mounting and version on one page All SEJ80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SEJ Adjustable Cylinder SEJ80X50-20S

The AirTAC SEJ80X50-20S is a double-acting, double-rod ISO 15552 profile cylinder with an adjustable retract stroke. A rod exits both ends, yielding equal force in both directions at 2268 N (0.5 MPa) and 3175 N (0.7 MPa). The 20 mm stop-screw window lets you dial in the retract end from 30 to 50 mm total effective stroke.

Because the piston has a rod on both sides, the annulus area is identical for extend and retract, ensuring perfectly balanced speed and thrust. An integrated magnet (-S) supports CMSE reed and DMSE electronic sensors for position feedback. The extruded aluminum barrel omits external tie rods, and adjustable air cushions at both ends protect components from end-of-stroke impact.

Airtac SEJ Adjustable Cylinder SEJ80X50-20S Technical Specifications

ModelAirtac SEJ Adjustable Cylinder SEJ80X50-20S
SeriesSEJ ISO 15552 adjustable-stroke cylinder
Bore sizeØ80 mm
Nominal stroke50 mm
Adjustment window20 mm (30–50 mm)
ConfigurationDouble rod, double acting
Port sizePT3/8
Rod threadM20×1.5
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm

Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressureForce (both directions)
0.5 MPa2268 N
0.7 MPa3175 N
Max (@1.0 MPa)463 kgf

A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.

Model Code: Airtac SEJ Adjustable Cylinder SEJ80X50-20S

SEJISO 15552 double-rod double-acting cylinder with adjustable stroke.
80Bore size in mm.
×50Nominal stroke length in mm.
-20Adjustment stroke window in mm (options: 10/20/30/40/50/75/100).
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).

Where the Airtac SEJ Adjustable Cylinder SEJ80X50-20S Is Used

precision_manufacturing

Press Brake Stop Fingers

Dial in the 30-50 mm retract window to set precise material stop positions for varying sheet metal flange depths, utilizing the 2268 N both-way force to hold the gauge.

straighten

Packaging Flap Folding

Fine-tune the folding stroke on the machine during commissioning to match carton dimensions perfectly without swapping out physical cylinder hardware.

swap_horiz

Multi-Part Clamping Station

Adjust the retract end-stop on the fly to accommodate different part heights during production changeovers, leveraging the equal push and pull thrust.

Is the Airtac SEJ Adjustable Cylinder SEJ80X50-20S the Right Cylinder?

Confirm the 20 mm adjustment window covers your required end-position variance. If you need less force, the adjacent 63 mm bore delivers 1402 N at 0.5 MPa both ways; if you need more, step up to the 100 mm bore for 3681 N at 0.5 MPa. For fixed-stroke applications without end-tuning, a standard SED double-rod cylinder is sufficient.

This cylinder does not hold position on air loss; the stop screw and air cushions only set the mechanical end and decelerate the load. For fail-safe holding, use an external rod lock or a BSED series cylinder. As a dimensionally interchangeable ISO 15552 cylinder, ensure your replacement matches the 80 mm bore, 50 mm stroke, 20 mm window, PT3/8 port, and desired mounting from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set.

AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder

Quick checklist

  • ✓ Need on-machine stroke fine-tuning?
  • ✓ Adjustment window (20mm) covers your range
  • ✓ Equal force both directions OK
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Set the stop screw within the 20mm window; lock it after adjusting.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SEJ Adjustable Cylinder SEJ80X50-20S FAQ

A stop screw on the back rod mechanically shortens the retract stroke over a 20 mm window. You can dial the effective stroke from 30 mm up to 50 mm, then lock the screw in place for precise end-position tuning on the machine.

Because it is a double-rod cylinder, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SEJ Cylinders

Request a Quote for Airtac SEJ Adjustable Cylinder SEJ80X50-20S

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SEJ80X50-20S and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.