
The AirTAC SEJ Adjustable Cylinder SEJ80X50-40 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 10–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X50-40 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40 mm mechanical stroke adjustment window. A rod exits both ends, yielding identical annulus areas so output force remains equal in both directions at 2268 N each way at 0.5 MPa. You can dial the retract end from a 10 mm up to a 50 mm effective stroke.
A stop screw on the back rod mechanically sets the end position, which you lock down after fine-tuning the machine. This 80 mm bore runs a PT3/8 port, a 25 mm rod, and field-adjustable air cushions at both ends to decelerate the load near stroke end. This SKU ships without a magnet, so it does not support CMSE or DMSE position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X50-40 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 40 mm (10–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40 mm window to hit a precise 12 mm forming depth on aluminum housings, leveraging the 2268 N both-way force without swapping hardware.
Adjust the retract end from 10 to 50 mm to accommodate varying box flap heights, using the equal double-rod force to cleanly tuck carton flaps.
Fine-tune the exact fill nozzle height during commissioning, locking the back-rod stop screw once the 3175 N at 0.7 MPa meets the valve seat.
Verify the 40 mm adjustment window covers your required positioning range, giving an effective 10 to 50 mm stroke. If you need less force, the neighboring 63 mm bore provides 1402 N both ways at 0.5 MPa; stepping up to the 100 mm bore yields 3681 N. If you never need to alter the end position, a fixed-stroke SED saves complexity. Note that the adjustable cushion and stop screw only decelerate and set the mechanical end; a plain SEJ does not hold position on air loss, so specify a BSED or external rod lock for fail-safe holding. For ISO 15552 replacement matching, confirm the 50 mm stroke, 40 mm window, PT3/8 port, and mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke within a 40 mm window. This makes the effective stroke adjustable from 10 mm up to the nominal 50 mm, which you lock in place after setting the exact machine end position.
Because it is a double-rod cylinder, the force is identical in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.