
The AirTAC SEJ Adjustable Cylinder SEJ80X50-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø80mm unit covers an effective stroke of 0–50mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X50-50S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 50 mm adjustable stroke window. A stop screw on the rear rod lets you dial the retract end position, yielding an effective stroke range of 0-50 mm for exact on-machine fine-tuning. Because a rod exits both ends, the annular area is identical in both directions, delivering an equal force of 2268 N each way at 0.5 MPa.
This 80 mm bore unit uses a PT3/8 port and a Ø25 mm rod with an M20x1.5 thread. It includes field-adjustable air cushions at both ends to manage deceleration over its 36 mm cushion length. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for exact end-position detection.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X50-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 50 mm |
| Adjustment window | 50 mm (0–50 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×50 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 0-50 mm retract window to match varying die heights during production changeovers, using the 3175 N both-way force to clamp workpieces securely.
Adjust the mechanical stop on the fly for different carton lengths on a sorting line, leveraging equal push and pull forces to handle heavy items without skewing.
Fine-tune the end position during initial setup to find the exact engagement point for a 80 mm bore assembly, locking the rear stop screw once the optimal 0-50 mm position is found.
Verify the 50 mm adjustment window covers your positioning range. If you need less force, the 63 mm bore provides 1402 N at 0.5 MPa; if you need more, stepping up to the 100 mm bore yields 3681 N at 0.5 MPa. If the exact end position never changes once set, a fixed-stroke SED cylinder is sufficient. Note that the adjustable cushion only decelerates the load near stroke end—it is not a lock, so an external rod lock is required for fail-safe holding. For an ISO 15552 replacement, match the 80 mm bore, 50 mm stroke, PT3/8 port, and mounting style (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
AirtacDistr lists every SEJ80 order code with its price on one page at https://airtacdistr.com/products/airtac-sej80-adjustable-cylinder
Quick checklist
The retract end position can be dialed in over a 50 mm window, giving an effective stroke range of 0-50 mm. You set the exact end position using a stop screw on the back rod, then lock it in place for repeatable operation.
Because it is a double-rod cylinder, force is equal in both directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.