
The AirTAC SEJ Adjustable Cylinder SEJ80X75-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø80mm unit covers an effective stroke of 55–75mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X75-20S is a double-acting, double-rod ISO 15552 profile cylinder featuring a mechanically adjustable retract stroke. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 2268 N each way at 0.5 MPa. The integrated stop screw on the back rod lets you dial the retract end over a 20 mm window, setting an effective stroke range of 55 to 75 mm.
Because the rod extends from the front and rear, the output force remains balanced during extension and retraction. This design prevents piston drift asymmetry and allows a cam or flag to be mounted on the rear rod. Adjustable air cushions at both ends decelerate the 25 mm rod near stroke end, while the -S magnet enables position tracking with CMSE reed or DMSE electronic sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X75-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 75 mm |
| Adjustment window | 20 mm (55–75 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the 55-75 mm retract stroke on a stamping press feed to precisely match material thickness variations, utilizing the 3175 N both-way force to clamp reliably.
Adjust the stroke on the fly when switching carton sizes on a packaging line, using the equal extend and retract forces to maintain balanced feeding dynamics.
Set a precise mechanical end stop for a palletizing probe, leveraging the 20 mm window to test multiple part heights without disassembling the fixture.
This 80 mm bore delivers 2268 N both ways at 0.5 MPa and 3175 N at 0.7 MPa, peaking at 463 kgf at 1.0 MPa. If your load requires less force, the adjacent 63 mm bore provides 1402 N both ways at 0.5 MPa; for heavier demands, the 100 mm bore offers 3681 N. The 20 mm adjustment window is ideal for fine-tuning a precise end stop during commissioning without swapping hardware. If you need a fixed position with no adjustment, a standard SED double-rod cylinder suffices. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. The PT3/8 port and ISO 15552 dimensions ensure direct dimensional interchangeability for machine upgrades.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 20 mm window. This allows you to set an effective stroke anywhere from 55 mm up to the nominal 75 mm, which is locked in place after positioning.
Because it is a double-rod cylinder, the force is equal in both directions. It generates 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.