
The AirTAC SEJ Adjustable Cylinder SEJ80X80-10S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø80mm unit covers an effective stroke of 70–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X80-10S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions. This provides an equal force of 2268 N each way at 0.5 MPa, preventing drive-side speed surges common to single-rod units.
You can dial the retract end position up to 10 mm via a stop screw on the back rod, yielding an effective stroke range of 70-80 mm. The included -S magnet enables precise end-of-stroke detection using CMSE reed or DMSE electronic sensors. Adjustable air cushions at both ends decelerate the load near stroke end, while the extruded aluminum barrel ensures ISO 15552 dimensional interchangeability without external tie rods.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X80-10S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 10 mm (70–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 70-80mm clamping position on a small pneumatic press during commissioning, utilizing the 2268N both-way force to secure sheet metal blanks.
Adjust the retract distance on a diverter arm to accommodate different package heights on a packaging line, locking the 10mm window precisely to the new part profile.
Fine-tune the mechanical stop on an assembly line indexer, using the equal both-way force to consistently push and pull a 100kg tooling carriage into the exact target zone.
If your application requires less force, stepping down to the 63 mm bore yields 1402 N at 0.5 MPa. For heavier payloads, the 100 mm bore offers 3681 N at 0.5 MPa. The 10 mm adjustment window is perfect for fine-tuning a specific end stop during commissioning without machining new hard stops.
If you do not need to dial in the end position, a fixed-stroke SED cylinder is a simpler alternative. Remember that the adjustable air cushion and mechanical stop screw only set the end position and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock. The PT3/8 port and M20x1.5 rod thread match standard ISO 15552 hardware.
Quick checklist
The retract end features a stop screw on the back rod that allows you to shorten the stroke by up to 10 mm. The effective stroke range is 70-80 mm, which you can fine-tune directly on the machine and lock in place.
Because a rod exits both ends, the force is identical in extend and retract directions. It provides 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.