
The AirTAC SEJ Adjustable Cylinder SEJ80X80-30 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 50–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X80-30 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. A rod exits both ends, meaning the effective retract stroke can be dialed down from 80mm to a 50mm minimum. This allows you to fine-tune the exact end position directly on the machine without swapping hardware.
Because the piston is symmetrical, the annular area is identical on both sides, yielding equal force in both directions at 2268 N each way at 0.5 MPa. The extruded aluminum barrel contains no external tie rods, and the rear rod can support an external cam or guide to resist rotation. It features field-adjustable air cushions at both ends to decelerate the load near stroke end.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X80-30 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 30 mm (50–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50-80mm retract stop to precisely fold varying carton flap heights, using the 2268N both-way force to securely crease heavy corrugated board.
Fine-tune the mechanical lower stop on a light assembly press, leveraging the equal both-way thrust to test and set precise 50-80mm forming depths.
Verify the 30mm adjustment window covers your required positioning range, giving an effective stroke of 50-80mm. If you need less force, stepping down to the 63mm bore yields 1402 N at 0.5 MPa; if you need more, stepping up to the 100mm bore provides 3681 N at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED is sufficient.
This cylinder uses a PT3/8 port and a Ø25mm rod with an M20x1.5 thread. Note that a plain SEJ does not hold position on air loss—the adjustable cushion and stop screw only set the mechanical end, so for fail-safe holding, use an external rod lock. This SKU lacks a magnet, so position sensing via CMSE or DMSE sensors is not supported.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke. For this model, the 30mm adjustment window allows the effective stroke to be dialed anywhere from 50mm up to the nominal 80mm. You set the exact end position and lock it in place.
Because it is a double-rod cylinder, the force is equal in both directions. It delivers 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.