
The AirTAC SEJ Adjustable Cylinder SEJ80X80-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø80mm unit covers an effective stroke of 50–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X80-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window, yielding an effective travel range of 50 to 80mm. A rod exits both ends, ensuring the annulus area remains identical for equal force and speed in both directions. You get 2268 N of thrust and pull at 0.5 MPa, scaling to 3175 N at 0.7 MPa.
Mechanical end-position tuning is achieved via a stop screw on the back rod, allowing you to dial in the retract distance precisely during commissioning and lock it down. This extruded aluminum barrel design includes a built-in magnet for position detection, pairs with PT3/8 ports, and utilizes field-adjustable air cushions at both ends to manage deceleration over the 36mm cushion length.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X80-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 30 mm (50–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 50-80mm retract stop during press setup to compensate for material thickness variations, utilizing the equal 3175N both-way force for consistent clamping.
Adjust the mechanical end-stop on the back rod to rapidly switch carton folding positions without swapping hardware, leveraging the stable ISO 15552 mounting footprint.
Fine-tune the gripping stroke within the 30mm window during machine commissioning, using the M20x1.5 rod-end thread to attach custom tooling that handles varying part sizes.
Verify the 30mm adjustment window covers your required end-position variance; if your travel needs are fixed, a standard SED double-rod cylinder is sufficient. For sizing both ways: the adjacent bore down is 63mm (delivering 1402 N at 0.5 MPa) and the next bore up is 100mm (delivering 3681 N at 0.5 MPa). When replacing an ISO 15552 unit, match the 80mm bore, 80mm nominal stroke, PT3/8 port, and mounting choice from the available Basic, FA, LB, TC, FTC, TCM1, and TCM2 set. Note that the adjustable air cushion decelerates the load near stroke end but does not function as a fail-safe lock; if you need position holding upon air loss, consider an external rod lock or BSED series. Since the stroke is under 300mm, side-loading is less severe, but external guides are still recommended for heavy lateral loads.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 30mm window. You can dial the effective travel anywhere from 50mm up to the full 80mm, then lock the screw in place for precise end-position tuning on the machine.
Because it is a double-rod cylinder, force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa. The included -S magnet works with CMSE reed and DMSE electronic sensors for end-of-stroke detection.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.