
The AirTAC SEJ Adjustable Cylinder SEJ80X80-40S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 40mm window, so this Ø80mm unit covers an effective stroke of 40–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X80-40S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 40mm adjustable stroke window. A rod exits both ends, meaning the effective retract stroke can be dialed from 40mm up to the nominal 80mm by turning a stop screw on the back rod. Because the piston sees equal annular area on both sides, output force is identical in both directions at 2268 N each way at 0.5 MPa.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to decelerate the load near stroke extremes. The included -S magnet enables position sensing with CMSE reed or DMSE electronic switches. The 25mm diameter rod uses an M20x1.5 thread, and the unit operates at speeds from 30 to 800 mm/s via PT3/8 ports.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X80-40S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 40 mm (40–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 40mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -40 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 40mm retract window to accommodate varying die set heights on a mechanical press, utilizing the 3175N both-way force at 0.7MPa to shift heavy lower bolsters securely.
Commissioning a carton sealer by precisely setting the 40-80mm effective stroke to match flap thickness, using the equal double-rod force to prevent crushing the package.
Acting as an adjustable endstop on a routing conveyor, the cylinder dials in the exact 40mm window to square panels of different widths against the 25mm rod.
This 80mm bore provides 3175 N of both-way force at 0.7 MPa, making it ideal for medium-duty positioning. If your application needs less force, step down to the 63mm bore which yields 1402 N at 0.5 MPa. For heavier changeover tasks, the 100mm bore offers 3681 N at 0.5 MPa. The 40mm adjustment window lets you fine-tune the end position during commissioning without machining new hardstops. If your stroke never varies, a fixed-stroke SED cylinder is sufficient. Remember that the adjustable cushion and stop screw decelerate the load but do not lock it; for fail-safe position holding on air loss, specify a BSED or an external rod lock. When replacing an ISO 15552 cylinder, match the 80mm bore, 80mm stroke, PT3/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
Quick checklist
A stop screw on the rear protruding rod lets you mechanically shorten the retract stroke within the 40mm window. You can set the effective stroke anywhere from 40mm up to the full 80mm, then lock the screw in place.
Because the double-rod design creates equal annular area on both sides, force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, and a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.