
The AirTAC SEJ Adjustable Cylinder SEJ80X80-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø80mm unit covers an effective stroke of 5–80mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ80X80-75S is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 2268 N (0.5 MPa) and 3175 N (0.7 MPa). The retract end stop screw lets you dial the effective stroke anywhere from 5 to 80 mm.
This extruded aluminum barrel design includes field-adjustable air cushions at both ends to manage kinetic energy near stroke end. The integrated -S magnet supports CMSE reed or DMSE electronic sensors for position feedback, while the back rod provides a convenient mounting point for a cam or flag.
| Model | Airtac SEJ Adjustable Cylinder SEJ80X80-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø80 mm |
| Nominal stroke | 80 mm |
| Adjustment window | 75 mm (5–80 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 2268 N |
| 0.7 MPa | 3175 N |
| Max (@1.0 MPa) | 463 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 5-80 mm effective stroke precisely when setting up an assembly press, leveraging the 3175 N retract force to seat varying part heights perfectly.
Adjust the retract stop on the fly for packaging lines running different carton depths, using the 2268 N both-way force to push diverter gates.
Fine-tune the final end-of-stroke position on a machining fixture during commissioning, locking the back-rod stop screw once the 80 mm travel is set.
The 75 mm adjustment window is ideal for precisely tuning a machine end-position during commissioning or matching varying part heights without swapping hardware. If 2268 N at 0.5 MPa is excessive, the adjacent bore down is 63 mm providing 1402 N both ways; if you need more thrust, the 100 mm bore yields 3681 N. For fixed-retract applications needing no on-machine tuning, a standard SED double-rod cylinder is sufficient.
When replacing an ISO 15552 cylinder, verify the 80 mm bore, 5-80 mm effective stroke, PT3/8 port, and your mounting choice from the SEJ subset (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that the adjustable cushion decelerates the load but does not hold position on air loss; for fail-safe holding, specify an external rod lock.
Quick checklist
The 75 mm adjustment window allows you to mechanically shorten the retract stroke, yielding an effective stroke range of 5 to 80 mm. You set the exact end-position via a stop screw on the back rod and lock it in place.
Because the rod exits both ends, the force is identical in both directions: 2268 N at 0.5 MPa, 3175 N at 0.7 MPa, with a maximum of 463 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.