Airtac SGC Standard Cylinder SGC125X150TC
The AirTAC Airtac SGC Standard Cylinder SGC125X150TC is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 150mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke150 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
About the Airtac SGC Standard Cylinder SGC125X150TC
Generating 6136 N of push force at 0.5 MPa, this double-acting ISO 15552 tie-rod cylinder is built for large-bore automation. Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, while the two-way piston seal maintains an internal oil reservoir to maximize service life. The G1/2 port and M27x2.0 rod thread handle the 125 mm bore's air volume efficiently.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches. For practical sizing, plan for about 3682 N of real work at 0.5 MPa, which equates to lifting roughly 313 kg vertically with a 2:1 safety margin.
Airtac SGC Standard Cylinder SGC125X150TC Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X150TC |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X150TC
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X150TC Is Used
Press Fit Assembly
Drives bearings into heavy housings on automotive production lines using its 6136 N push force.
Pallet Diverting
Actuates a TC trunnion-mounted routing gate to redirect 300 kg pallets on a packaging conveyor.
Heavy Gate Operation
Opens and closes large bulk-material discharge hoppers in agricultural storage facilities.
Is the Airtac SGC Standard Cylinder SGC125X150TC the Right Cylinder?
This 125 mm bore sits at the entry point of the SGC large-bore family; if your task requires less force you must step down to a non-SGC series, while heavier loads necessitate stepping up to the 160 mm bore (10053 N push at 0.5 MPa). The included TC trunnion mount utilizes the standardized ISO 15552 mounting interface, allowing seamless integration with existing fixture designs. Since this model has no -S magnet, external limit switches are required for end-position detection. Furthermore, a plain cylinder drifts when air is lost or the valve is centered—the adjustable air cushion only decelerates the piston near stroke end, so install an external rod lock or pilot-operated check valve if you need to hold a suspended load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X150TC FAQ
At 0.5 MPa it provides 6136 N push and 5734 N pull. At 0.7 MPa it provides 8590 N push and 8028 N pull. The theoretical maximum force is 1251 kgf at 1.0 MPa. The air port size is G1/2.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select an SGC model with the -S suffix for magnetic position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X150TC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.