Airtac SGC Standard Cylinder SGC125X2000
The AirTAC SGC Standard Cylinder SGC125X2000 is a genuine double acting ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø125mm bore and 2000mm stroke, G1/2 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
- BoreØ125 mm
- Stroke2000 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- CushionAdjustable, 40 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SGC Standard Cylinder SGC125X2000
Delivering 6136 N of push force at 0.5 MPa, this double-acting 125 mm bore cylinder is engineered for long 2000 mm reach applications. Because 2000 mm exceeds the 1500 mm standard maximum, this SKU is a non-standard, made-to-order configuration. It features a robust tie-rod build where four steel rods clamp the aluminum barrel to the covers, while the two-way piston seal maintains an internal oil reservoir for extended operational life.
The standardized ISO 15552 mounting interface ensures it drops directly into existing large-bore fixtures. It uses a G1/2 port, an M27x2.0 rod thread, and 40 mm adjustable air cushions at both ends. Note that this specific SKU lacks the -S magnet, meaning it cannot support CMSG, DMSG, or EMSG magnetic switches.
Airtac SGC Standard Cylinder SGC125X2000 Technical Specifications
| Model | Airtac SGC Standard Cylinder SGC125X2000 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø125 mm |
| Stroke | 2000 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SGC Standard Cylinder SGC125X2000
| SGC | ISO 15552 tie-rod cylinder (double-acting type). |
|---|---|
| 125 | Bore size in mm (125 / 160 / 200 / 250). |
| ×2000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SGC Standard Cylinder SGC125X2000 Is Used
Automated Panel Reject
Pushes oversized wood panels off a high-speed conveyor line over a 2000 mm span, utilizing the 6136 N thrust at 0.5 MPa.
Long-Reach Pallet Dispenser
Extends 2 meters to feed empty pallets into a robotic cell, requiring external guides to support the 32 mm rod over the long stroke.
Is the Airtac SGC Standard Cylinder SGC125X2000 the Right Cylinder?
When sizing this 125 mm bore, verify if the 6136 N push at 0.5 MPa is sufficient; if more power is needed, the next size up is the 160 mm bore delivering 10053 N. Since 125 mm is the smallest SGC bore, there is no smaller standard option in this series. For a 2000 mm stroke, avoiding rod bending and side-load damage is critical—an external guide or rod-end support must be integrated to prevent premature seal wear.
Remember that a standard double-acting cylinder drifts when air is lost or a valve is centered; the air cushions only decelerate the piston near stroke ends and do not act as a locking brake. To suspend a load safely, install an external rod lock or a pilot-operated check valve. Furthermore, without the -S magnet option, position sensing is unavailable.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Long-stroke side load — support the rod end
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load; support long strokes at the rod end.
- check Set cushions to minimum, then release gradually.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SGC Standard Cylinder SGC125X2000 FAQ
This 125 mm bore cylinder provides 6136 N push and 5734 N pull at 0.5 MPa, 8590 N push and 8028 N pull at 0.7 MPa, with a theoretical maximum of 1251 kgf at 1.0 MPa. It uses a G1/2 air port and operates at speeds of 30-500 mm/s.
This specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. It uses a genuine ISO 15552 mounting interface for fixture interchangeability, and its four steel tie rods provide high rigidity for large-bore thrust.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Made to Order
Large-bore cylinders built to order — confirm lead time.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SGC Cylinders
Request a Quote for Airtac SGC Standard Cylinder SGC125X2000
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.