
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X1000-20 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 1000mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
The four steel tie rods clamp the aluminum barrel to the covers, delivering high structural rigidity, while the G1 air port feeds the 50 mm piston rod. Because the nominal 1000 mm stroke represents the maximum travel, the -20 code lets you shorten the extend stroke by up to 20 mm without changing the cylinder itself; the retract end remains fixed.
It features a 60 mm adjustable air cushion at each end to absorb kinetic energy. Note that TPU seals are not offered on this 250 mm bore; standard NBR packings cover -20 to +70 C, with a Viton H option for 0-150 C environments. Since this SKU lacks the -S suffix, it cannot accept CMSG, DMSG, or EMSG magnetic sensors.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X1000-20 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 1000 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×1000 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Raises large loaded pallets in automated distribution hubs, using the 20 mm extend adjuster to fine-tune the exact discharge height for different conveyor interfaces.
Ejects heavy formed parts from large industrial presses, relying on the 60 mm adjustable air cushion to decelerate the 1000 mm travel smoothly.
Lowers massive stamping dies into position, utilizing the on-site extend shortening window to set precise material contact without machinery rework.
The adjustable stroke is particularly useful when you need to share a spare cylinder across multiple stroke variants or dial in a precise end position on-site. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because the 1000 mm stroke is substantial, you must use external guide rails to prevent rod bending and absorb side loads. To add position sensing, you must select the -S magnet variant for CMSG, DMSG, or EMSG switches.
Quick checklist
The theoretical maximum force is 5006 kgf at 1.0 MPa.
The nominal 1000 mm stroke is the maximum travel. The external adjuster lets you shorten the extend stroke by up to 20 mm on-site, giving a usable extend range of 980 to 1000 mm. The retract end is fixed, and this stop is for positioning only, not for holding a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.