
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X250-100 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 250mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
Delivering massive thrust for heavy industry, this large-bore ISO 15552 tie-rod cylinder pushes with 24543 N and pulls with 23562 N at 0.5 MPa. The four steel tie rods clamp the aluminium barrel to the covers, providing structural rigidity for high-impact operations. A G1 air port feeds the chamber, while the 60 mm adjustable air cushions absorb kinetic energy at both stroke ends.
The -100 code means an external adjuster can shorten the extend stroke on-site by up to 100 mm, yielding a usable range of 150 to 250 mm without changing the cylinder itself. This on-site end-position tuning is ideal for shared spares across stroke variants. Because it lacks the -S suffix, this SKU cannot take a magnetic switch; the -S variant adds a magnet for CMSG/DMSG/EMSG sensors. Note that TPU seals are unavailable for this 250 mm bore, though a Viton H option extends the temperature range to 0-150 C.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X250-100 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×250 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Tunes the extend stroke on-site to press varying pallet heights, using the 100 mm window to prevent over-travel while applying up to 34360 N of clamping force at 0.7 MPa.
Adjusts the end position precisely for different material thicknesses, leveraging the 60 mm cushions to decelerate the 5006 kgf theoretical max impact before the stroke ends.
Safely lowers heavy molds by shortening the extend distance on-site, ensuring precise placement without repositioning the entire ISO 15552 mounting fixture.
The 100 mm adjustable window is highly useful when you need to fine-tune end positions across multiple fixtures without ordering custom strokes. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. For any stroke length at this bore, guiding the load externally is critical to prevent side-load damage to the rod seal. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve if you need to hold a load securely.
Quick checklist
This 250 mm bore cylinder uses a G1 air port and a M42x2.0 rod thread. The theoretical maximum force is 5006 kgf at 1.0 MPa.
The nominal 250 mm stroke is the maximum. The external adjuster lets you shorten the extend stroke on-site by up to 100 mm, giving a usable extend range of 150 to 250 mm. The retract end is fixed, and this stop only sets the end position—it is not a load lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.