
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X500-20 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 500mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
Four steel tie rods clamp the aluminum barrel to the covers for high structural rigidity, and the G1 air port feeds the 50 mm piston rod.
The -20 code defines a 20 mm external adjuster window that shortens the extend stroke on site from the 500 mm maximum down to 480 mm, letting you fine-tune the end position without changing the cylinder itself. The retract end remains fixed. Note that TPU seals are not available on this 250 mm bore; it uses NBR buffer gaskets, with a Viton H option for 0-150 C high-heat environments. This plain SKU lacks a magnet and cannot take a sensor, whereas the -S variant supports CMSG/DMSG/EMSG switches.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X500-20 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 500 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Raises large loaded pallets, using the 20 mm adjuster to dial in the exact raise height and avoid overshooting the conveyor transfer point.
Pushes substantial injection molds into the machine bed, trimming the extend stroke by up to 20 mm to seat the tooling without mechanical stops.
The adjustable stroke is ideal for sharing a spare across stroke variants or making on-site end-position tweaks. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because the stroke is 500 mm, you must use external guides to prevent rod bending and manage side loads. Remember that a plain cylinder drifts on air loss; use an external rod lock or pilot-operated check valve for held loads.
Quick checklist
This 250 mm bore cylinder features a G1 air port and an M42x2.0 rod thread.
The external adjuster lets you shorten the extend stroke by up to 20 mm on site, giving a usable extend range of 480 to 500 mm while the nominal 500 mm remains the maximum. The retract end is fixed, and the adjuster only sets the end position; it does not lock the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.