
The AirTAC SGCJ200-250 Adjustable Cylinder SGCJ250X600-100 is a genuine double acting, double rod, adjustable stroke ISO 15552 (orig. ISO 6431) tie-rod air cylinder with a Ø250mm bore and 600mm stroke, G1 air ports and adjustable end cushioning. Its large-bore tie-rod build delivers high thrust and drops into standardized ISO 15552 mounting on heavy automation.
Generating massive thrust for heavy industry, this large-bore ISO 15552 tie-rod cylinder pushes with 24543 N and pulls with 23562 N at 0.5 MPa. Four steel tie rods clamp the aluminum barrel to the covers for structural rigidity. A G1 air port feeds the 50 mm piston rod, while adjustable 60 mm air cushions decelerate the payload at both ends.
The external adjuster shortens the extend stroke on-site by up to 100 mm, meaning your usable extend travel spans 500 to 600 mm without changing the cylinder itself. This on-site end-position tuning is ideal for sharing spares across stroke variants. Because this is a 250 mm bore, TPU seals are unavailable and NBR buffer gaskets are standard, though a Viton H option raises the thermal limit to 150 C. Note this SKU lacks a magnet and cannot take a sensor.
| Model | Airtac SGCJ200-250 Adjustable Cylinder SGCJ250X600-100 |
|---|---|
| Series | SGC ISO 15552 tie-rod cylinder |
| Bore size | Ø250 mm |
| Stroke | 600 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | G1 |
| Rod thread | M42×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 60 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SGC datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Thread options: PT (blank) / G. TPU seals are not available for the Ø250 bore (NBR / Viton only).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 23562 N | 23562 N |
| 0.7 MPa | 32987 N | 32987 N |
| Max (@1.0 MPa) | 4805 kgf | |
SGCJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative).
| SGCJ | ISO 15552 tie-rod cylinder (adjustable-stroke type). |
|---|---|
| 250 | Bore size in mm (125 / 160 / 200 / 250). |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
SGC-family variants: SGC (double acting), SGCD (double rod), SGCJ (adjustable stroke). Mounting: LB / FA / FB / CA / CB / CR / TC / FTC / TCM1 / TCM2. Seals: TPU (blank) / Viton H / NBR N. On Ø250 the blank code is the standard NBR build (no TPU).
Fine-tune the 600 mm extend stroke down to 500 mm on-site to precisely eject large formed panels without recalculating fixed stop distances.
Dial in the 100 mm adjuster window to accommodate varying pallet depths on a shared conveyor line while delivering 24543 N of holding push.
Clamp heavy injection molds securely using the 34360 N available at 0.7 MPa, tweaking the extend end position to match different mold heights.
The 100 mm adjustable window lets you fine-tune the extend end position on-site, perfect for synchronizing multi-cylinder lines. Mounting options include FA, LB, TC, FTC, TCM1, and TCM2 brackets. Because the stroke is 600 mm, external guides are strongly recommended to prevent rod bending under side loads. Choose the -S variant if you need CMSG, DMSG, or EMSG magnetic sensors, as this plain SKU cannot accept them.
Quick checklist
At 0.5 MPa it pushes with 24543 N and pulls with 23562 N. At 0.7 MPa the push is 34360 N and the pull is 32986 N. The theoretical maximum force is 5006 kgf at 1.0 MPa. This 250 mm bore cylinder uses a G1 air port and features a 50 mm rod with an M42x2.0 thread.
The external stop screw shortens the extend stroke by up to 100 mm on-site, giving a usable extend range of 500 to 600 mm from the 600 mm nominal maximum. The retract end remains fixed. This stop only sets the end position; it is not a load lock. A plain cylinder drifts on air loss, so use an external rod lock or pilot-operated check valve to hold a load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Large-bore cylinders built to order — confirm lead time.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.