This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI125X1200S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI125 Standard Cylinder SI125X1200S
The AirTAC SI125 Standard Cylinder SI125X1200S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø125mm bore and 1200mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI125X1200S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ125 mm
- Stroke1200 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- StatusDiscontinued → SAI125X1200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI125 Standard Cylinder SI125X1200S
The AirTAC SI125X1200S is a discontinued double-acting ISO 15552 profile cylinder with a 125 mm bore and 1200 mm stroke. It delivers 6136 N push force at 0.5 MPa via a G1/2 port. AirTAC replaced this legacy unit with the SAI125X1200S, a direct sharing the exact ISO 15552 mounting interface, M27x2 rod thread and 40 mm cushions.
The SAI upgrade features a new piston seal with two Y-shaped one-way elements for low start-up pressure and long life. The SAI family also adds SAIL and BSAI lock variants the SI lacked. Your -S magnet works with legacy CS1-B/DS1-B sensors.
Airtac SI125 Standard Cylinder SI125X1200S Technical Specifications
| Model | Airtac SI125 Standard Cylinder SI125X1200S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI125X1200S |
| Bore size | Ø125 mm |
| Stroke | 1200 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI125X1200S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
The SAI125X1200S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI125 Standard Cylinder SI125X1200S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 125 | Bore size in mm. |
| ×1200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI125 Standard Cylinder SI125X1200S Is Used
Heavy Material Lifts
Drives large platform elevators and heavy pallet lifts where the 6136 N push force at 0.5 MPa easily handles substantial vertical payloads.
Long-Stroke Pressing
Executes extended 1200 mm pressing or forming strokes in automotive and heavy assembly lines, requiring external guide rails to prevent rod bending.
Large Door Actuation
Opens and closes massive industrial warehouse doors or safety gates, utilizing the 125 mm bore's high thrust and robust 32 mm piston rod.
Replacing the Airtac SI125 Standard Cylinder SI125X1200S with the SAI125X1200S
To replace the SI125X1200S, order the SAI125X1200S. Confirm the ISO 15552 mounting accessory (LB, FA, TC), the G1/2 port, and the -S magnet. Sizing both ways: a 100 mm bore gives 3927 N push at 0.5 MPa, while a 160 mm bore yields 10053 N. At 0.7 MPa this 125 mm bore pushes 8590 N. A plain cylinder drifts on air loss; cushions only decelerate. For load holding, use an external rod lock, pilot check valve, or the SAIL/BSAI lock variant. Because 1200 mm exceeds 300 mm, use external guides to prevent rod bending and side-load damage.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI125X1200S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI125 Standard Cylinder SI125X1200S FAQ
Yes, the SI125X1200S is discontinued. The direct replacement is the SAI125X1200S. It is dimensionally interchangeable per ISO 15552, retaining the same 125 mm bore, 1200 mm stroke, G1/2 port, and mounting interface, so it fits existing fixtures directly.
This double-acting cylinder features a G1/2 air port. The force ratings are: 6136 N push and 5734 N pull at 0.5 MPa, 8590 N push at 0.7 MPa, 11045 N push at 0.9 MPa, and a theoretical maximum of 1251 kgf at 1.0 MPa. Operating speed is 30-500 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the SAI125X1200S
Send us the quantity and destination. We confirm price, stock and lead time on the SAI125X1200S replacement — usually within 7-8 hours.