This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI200X1300TC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI200 Standard Cylinder SI200X1300TC
The AirTAC SI200 Standard Cylinder SI200X1300TC is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø200mm bore and 1300mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI200X1300TC, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ200 mm
- Stroke1300 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI200X1300TC
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI200 Standard Cylinder SI200X1300TC
The AirTAC SI200X1300TC is a discontinued double-acting ISO 15552 profile cylinder with a 200mm bore and 1300mm stroke. It delivers 15708 N push force at 0.5 MPa through a G3/4 port. The direct replacement is the SAI200X1300TC, matching the TC trunnion mount, M36x2 thread, and 3204 kgf max force.
The SAI upgrade features two Y-shaped one-way piston seals for low start-up pressure and long life. This SKU lacks the -S magnet and cannot take a sensor; legacy -S versions used CS1-B/DS1-B switches. For high heat, Viton H seals raise the limit to 150 C.
Airtac SI200 Standard Cylinder SI200X1300TC Technical Specifications
| Model | Airtac SI200 Standard Cylinder SI200X1300TC |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI200X1300TC |
| Bore size | Ø200 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI200X1300TC carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
The SAI200X1300TC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI200 Standard Cylinder SI200X1300TC
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 200 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI200 Standard Cylinder SI200X1300TC Is Used
Heavy Stamp Presses
Drives large heavy-duty stamping presses requiring 28274 N push force at 0.9 MPa to form thick metal plates reliably.
Bulk Material Diverters
Actuates massive diverters on aggregate or mining conveyor lines, utilizing the 1300mm stroke to clear wide belts.
Replacing the Airtac SI200 Standard Cylinder SI200X1300TC with the SAI200X1300TC
To replace the SI200X1300TC, order the SAI200X1300TC. Verify the ISO 15552 TC trunnion interface, 200mm bore, 1300mm stroke, G3/4 port, and M36x2 rod thread. Because this SKU lacks the -S magnet, it cannot accept position sensors; if sensing is needed, specify an SAI200X1300TC-S. For sizing, the 160mm bore neighbor offers 10053 N [email protected], while this 200mm bore provides 15708 N. At 1300mm, side-load and rod-bending risks are high; use external guides to prevent premature wear. A plain cylinder drifts on air loss—the cushion only decelerates. For load holding, use an external rod lock, pilot check valve, or the SAIL/BSAI lock variants.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI200X1300TC
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI200 Standard Cylinder SI200X1300TC FAQ
Yes, the SI200X1300TC is discontinued. The direct replacement is the SAI200X1300TC. It is dimensionally interchangeable per ISO 15552, matching the 200mm bore, 1300mm stroke, TC trunnion mount, G3/4 port, and output force. You simply order the SAI equivalent.
The bore is 200mm with a G3/4 air port. Force ratings are: push 15708 N and pull 15080 N at 0.5 MPa; push 21991 N at 0.7 MPa; push 28274 N at 0.9 MPa. The theoretical max force is 3204 kgf at 1.0 MPa. Speed is 30-500 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the SAI200X1300TC
Send us the quantity and destination. We confirm price, stock and lead time on the SAI200X1300TC replacement — usually within 7-8 hours.