This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI200X1500, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI200 Standard Cylinder SI200X1500
The AirTAC SI200 Standard Cylinder SI200X1500 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø200mm bore and 1500mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI200X1500, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ200 mm
- Stroke1500 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI200X1500
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI200 Standard Cylinder SI200X1500
The AirTAC SI200X1500 is a discontinued double-acting ISO 15552 profile cylinder with a 1500 mm stroke, delivering 15708 N push force at 0.5 MPa through its G3/4 port. AirTAC replaced this legacy unit with the SAI200X1500. The SAI is a direct upgrade: it preserves the exact ISO 15552 mounting interface, bore, stroke, output force, port size and accessories, so it fits existing fixtures perfectly.
The SAI upgrade introduces a refined piston seal with two Y-shaped one-way elements for low start-up pressure and extended life. Note this SKU lacks a magnet, so it cannot accept position sensors. If high-temperature operation is needed, a Viton H seal option raises the operating range to 0-150 C.
Airtac SI200 Standard Cylinder SI200X1500 Technical Specifications
| Model | Airtac SI200 Standard Cylinder SI200X1500 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI200X1500 |
| Bore size | Ø200 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI200X1500 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
The SAI200X1500 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI200 Standard Cylinder SI200X1500
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 200 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI200 Standard Cylinder SI200X1500 Is Used
Heavy Machinery Ejection
Provides the massive 15708 N push at 0.5 MPa needed to eject large formed parts from heavy industrial presses over a 1500 mm travel distance.
Bulk Material Diversion
Drives oversized diverter arms on high-capacity bulk material conveyors, utilizing the 50 mm adjustable cushions to decelerate heavy loads at stroke ends.
Replacing the Airtac SI200 Standard Cylinder SI200X1500 with the SAI200X1500
To replace the SI200X1500, order the SAI200X1500 and verify your ISO 15552 mounting interface, M36x2 rod thread, G3/4 port, and 1500 mm stroke. Because this plain unit has no magnet, it cannot support legacy CS1-B/DS1-B sensors. If you need to downsize, the 160 mm bore offers 10053 N push at 0.5 MPa; if sizing up, consider external solutions. A standard cylinder does not hold load on air loss—the cushion only decelerates—so for holding use an external rod lock, pilot check valve, or the SAIL/BSAI lock variant. Finally, at 1500 mm, the 40 mm rod is highly susceptible to bending; always use external guides to prevent side loads.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI200X1500
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI200 Standard Cylinder SI200X1500 FAQ
Yes, the SI200X1500 is discontinued. The direct replacement is the SAI200X1500. It features the same ISO 15552 mounting interface, 200 mm bore, 1500 mm stroke, output force, and G3/4 port, fitting directly into existing fixtures.
The 200 mm bore delivers 15708 N push and 15080 N pull at 0.5 MPa, 21991 N push at 0.7 MPa, 28274 N push at 0.9 MPa, and a theoretical max of 3204 kgf at 1.0 MPa. Operating speed is 30-500 mm/s. The G3/4 port and M36x2 rod thread are fixed by the bore.
Related AirTAC SAI Cylinders
Request a Quote for the SAI200X1500
Send us the quantity and destination. We confirm price, stock and lead time on the SAI200X1500 replacement — usually within 7-8 hours.