This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI200X160TC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI200 Standard Cylinder SI200X160TC
The AirTAC SI200 Standard Cylinder SI200X160TC is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø200mm bore and 160mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI200X160TC, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ200 mm
- Stroke160 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI200X160TC
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI200 Standard Cylinder SI200X160TC
The AirTAC SI200X160TC is a discontinued double-acting ISO 15552 profile cylinder with a 200mm bore and 160mm stroke. It delivers 15708 N push and 15080 N pull at 0.5 MPa through a G3/4 port. Because this legacy unit is end-of-life, you should order the SAI200X160TC direct replacement. It shares the exact ISO 15552 mounting interface, TC trunnion, M36x2 rod thread and force ratings.
The SAI upgrade introduces a two Y-shaped one-way piston seal for low start-up pressure and long life. Note this specific SKU lacks a magnet, so it cannot accept CS1-B/DS1-B sensors. The SAI family also adds SAIL, SAIF and BSAI lock variants the SI lacked.
Airtac SI200 Standard Cylinder SI200X160TC Technical Specifications
| Model | Airtac SI200 Standard Cylinder SI200X160TC |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI200X160TC |
| Bore size | Ø200 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI200X160TC carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
The SAI200X160TC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI200 Standard Cylinder SI200X160TC
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 200 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI200 Standard Cylinder SI200X160TC Is Used
Heavy Press Systems
Generates 21991 N at 0.7 MPa for forming and stamping thick materials, utilizing the robust 40mm piston rod.
Large Gate Actuation
Drives industrial diverter gates and heavy doors where the TC trunnion absorbs pivot stresses.
Replacing the Airtac SI200 Standard Cylinder SI200X160TC with the SAI200X160TC
To replace the SI200X160TC, specify the SAI200X160TC and verify the ISO 15552 TC trunnion mount, 160mm stroke, G3/4 port and M36x2 thread. This non-magnetic SKU cannot take position sensors; if sensing is needed, order an SAI with the S suffix for current switches. For load sizing, the 200mm bore yields 15708 N at 0.5 MPa; dropping to a 160mm bore gives 10053 N. A plain cylinder drifts on air loss—the 50mm cushions only decelerate—so use an external rod lock or pilot check valve for holding, or select the SAIL/BSAI lock variant. With a 160mm stroke, rod bending is low, but always guide the load to prevent side-load wear.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI200X160TC
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI200 Standard Cylinder SI200X160TC FAQ
Yes, the SI200X160TC is discontinued. The direct replacement is the SAI200X160TC. It is dimensionally interchangeable per ISO 15552, retaining the same 200mm bore, 160mm stroke, G3/4 port, TC mount and output force.
At 0.5 MPa it pushes 15708 N and pulls 15080 N. At 0.7 MPa push is 21991 N, and at 0.9 MPa it is 28274 N. The theoretical max is 3204 kgf at 1.0 MPa. Operating speed is 30-500 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the SAI200X160TC
Send us the quantity and destination. We confirm price, stock and lead time on the SAI200X160TC replacement — usually within 7-8 hours.