This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI200X1700, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI200 Standard Cylinder SI200X1700
The AirTAC SI200 Standard Cylinder SI200X1700 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø200mm bore and 1700mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI200X1700, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ200 mm
- Stroke1700 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI200X1700
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI200 Standard Cylinder SI200X1700
The AirTAC SI200X1700 is a discontinued double-acting ISO 15552 profile cylinder with a 200 mm bore and 1700 mm stroke. Because 1700 mm exceeds the 1500 mm maximum standard stroke for this bore, it is a non-standard, made-to-order length. It delivers 15708 N push force at 0.5 MPa. The direct replacement is the SAI200X1700, which retains the exact ISO 15552 mounting interface, G3/4 port, and M36x2 rod thread.
The SAI upgrade features a new piston seal with two Y-shaped one-way elements for low start-up pressure and long life. Note this SKU lacks a magnet (-S) and cannot take a CS1-B/DS1-B sensor. For load holding, the cushion only decelerates; use an external rod lock or pilot check valve.
Airtac SI200 Standard Cylinder SI200X1700 Technical Specifications
| Model | Airtac SI200 Standard Cylinder SI200X1700 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI200X1700 |
| Bore size | Ø200 mm |
| Stroke | 1700 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI200X1700 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
The SAI200X1700 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI200 Standard Cylinder SI200X1700
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 200 | Bore size in mm. |
| ×1700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI200 Standard Cylinder SI200X1700 Is Used
Heavy Stamp Press
Drives large tonnage metal forming presses requiring 21991 N push force at 0.7 MPa over a long travel distance.
Large Mold Handler
Actuates heavy injection molds into position, relying on external guides to prevent rod bending on the 1700 mm stroke.
Replacing the Airtac SI200 Standard Cylinder SI200X1700 with the SAI200X1700
To replace the SI200X1700, order the SAI200X1700. Confirm the ISO 15552 mounting interface, the G3/4 port, and your mounting accessory (LB, FA, TC, etc.). This 1700 mm length is non-standard (exceeding the 1500 mm max), so expect made-to-order lead times. At 0.5 MPa it pushes 15708 N; if sizing both ways, the neighboring 160 mm bore yields 10053 N. Because this stroke exceeds 300 mm, you must support the load with external guides to prevent rod bending and side-load damage. This non-magnetic SKU cannot accept position sensors. If you need positive load holding on air loss, step up to the SAIL or BSAI lock variants, or use an external pilot-operated check valve.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI200X1700
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI200 Standard Cylinder SI200X1700 FAQ
Yes, the SI200X1700 is discontinued. The direct replacement is the SAI200X1700. It is dimensionally interchangeable per ISO 15552, matching the 200 mm bore, 1700 mm stroke, G3/4 port, and mounting interface, so it fits existing fixtures directly.
This double-acting cylinder features a G3/4 air port and M36x2 rod thread. The thrust ratings are: 15708 N push and 15080 N pull at 0.5 MPa; 21991 N push at 0.7 MPa; 28274 N push at 0.9 MPa; with a theoretical max of 3204 kgf at 1.0 MPa. Speed is 30-500 mm/s.
Related AirTAC SAI Cylinders
Request a Quote for the SAI200X1700
Send us the quantity and destination. We confirm price, stock and lead time on the SAI200X1700 replacement — usually within 7-8 hours.