This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI200X500TC, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI200 Standard Cylinder SI200X500TC
The AirTAC SI200 Standard Cylinder SI200X500TC is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø200mm bore and 500mm stroke, G3/4 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI200X500TC, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ200 mm
- Stroke500 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2.0
- StatusDiscontinued → SAI200X500TC
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI200 Standard Cylinder SI200X500TC
The AirTAC SI200X500TC is a discontinued double-acting ISO 15552 profile cylinder with a 200mm bore and 500mm stroke. Delivering 15708 N push force at 0.5 MPa via a G3/4 port, it is replaced by the SAI200X500TC. This direct successor shares the exact TC trunnion mounting, M36x2 thread, and dimensions, fitting existing fixtures perfectly.
The SAI upgrade features a two Y-shaped one-way piston seal for low start-up pressure and longevity. Without a magnet (-S), this SKU cannot take a sensor. For high heat, Viton H seals raise the temperature limit to 150 C.
Airtac SI200 Standard Cylinder SI200X500TC Technical Specifications
| Model | Airtac SI200 Standard Cylinder SI200X500TC |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI200X500TC |
| Bore size | Ø200 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI200X500TC carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø200mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 15708 N | 15080 N |
| 0.7 MPa | 21991 N | — |
| Max (@1.0 MPa) | 3204 kgf | |
The SAI200X500TC produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI200 Standard Cylinder SI200X500TC
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 200 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI200 Standard Cylinder SI200X500TC Is Used
Heavy Stamping
Drives large presses and stamping dies requiring 15708 N thrust at 0.5 MPa.
Clamping Jigs
Secures oversized fabrication parts in welding jigs with a 3204 kgf maximum hold.
Replacing the Airtac SI200 Standard Cylinder SI200X500TC with the SAI200X500TC
To replace the SI200X500TC, order the SAI200X500TC, confirming the ISO 15552 TC trunnion mount, 500mm stroke, and G3/4 port. The SAI family also adds SAIL (air-released lock), SAIF (valve), and BSAI (clamp-lock) variants the SI lacked. If downsizing, neighbor bores offer less force; a 160mm bore yields 10053 N push at 0.5 MPa. Note: a plain cylinder drifts on air loss—the cushion only decelerates. Use an external rod lock or pilot check valve for holding. At 500mm stroke, use external guides to prevent rod bending and side loads. This SKU lacks a magnet, so it cannot accept CS1-B/DS1-B sensors.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI200X500TC
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI200 Standard Cylinder SI200X500TC FAQ
Yes, the SI200X500TC is discontinued. The direct replacement is the SAI200X500TC, which matches the 200mm bore, 500mm stroke, G3/4 port, and ISO 15552 TC mounting interface.
At 0.5 MPa it pushes 15708 N and pulls 15080 N. At 0.7 MPa push is 21991 N, and max theoretical force is 3204 kgf at 1.0 MPa. Speed is 30-500 mm/s. It uses a 40mm rod, M36x2 thread, and 50mm cushions.
Related AirTAC SAI Cylinders
Request a Quote for the SAI200X500TC
Send us the quantity and destination. We confirm price, stock and lead time on the SAI200X500TC replacement — usually within 7-8 hours.