This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI32X30N, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI32 Standard Air Cylinder SI32X30N
The AirTAC SI32 Standard Air Cylinder SI32X30N is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 30mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI32X30N, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke30 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAI32X30N
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI32 Standard Air Cylinder SI32X30N
The AirTAC SI32X30N is a discontinued double-acting ISO 15552 profile cylinder with a 32mm bore and 30mm stroke. Delivering 402N push force at 0.5MPa via a G1/8 port, it is directly replaced by the SAI32X30N. This direct upgrade shares identical ISO 15552 mounting dimensions, bore, stroke, force and port, fitting existing fixtures perfectly.
The SAI replacement upgrades longevity with two Y-shaped one-way piston seals for low start-up pressure. This SKU lacks a magnet (-S) so cannot take a sensor, though legacy SI sensors were CS1-B/DS1-B. The NBR seal suits -20 to +70C; Viton H extends this to 150C.
Airtac SI32 Standard Air Cylinder SI32X30N Technical Specifications
| Model | Airtac SI32 Standard Air Cylinder SI32X30N |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI32X30N |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI32X30N carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAI32X30N produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI32 Standard Air Cylinder SI32X30N
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI32 Standard Air Cylinder SI32X30N Is Used
Small Part Ejection
Ideal for pushing lightweight finished parts out of a machining fixture using its 402N thrust at 0.5 MPa.
Compact Clamping
Provides reliable holding force for small workpieces in tight spaces where the 30mm stroke and G1/8 port fit neatly.
Gate Diverting
Actuates small pneumatic flaps or diverter gates in packaging lines, offering fast 30-800 mm/s cycling.
Replacing the Airtac SI32 Standard Air Cylinder SI32X30N with the SAI32X30N
To replace the SI32X30N, order the SAI32X30N. Confirm the ISO 15552 mounting interface, 32mm bore, 30mm stroke, G1/8 port (PT/G/NPT thread) and your mounting accessory (LB, FA, TC, etc.). Because this SKU has no -S magnet, it cannot accept a magnetic switch; order a magnet-equipped SAI32X30NS if position sensing is required. The 32mm bore yields 402N push at 0.5MPa; sizing down is not an option, while sizing up to 40mm provides 628N. Note that a plain cylinder drifts on air loss—the cushion only decelerates. For load holding, use an external pilot check valve or explore SAIL/BSAI lock variants. At 30mm stroke, side-load risks are minimal, but ensure straight alignment.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI32X30N
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI32 Standard Air Cylinder SI32X30N FAQ
Yes, the SI32X30N is discontinued. The direct replacement is the AirTAC SAI32X30N. It is dimensionally interchangeable per ISO 15552, retaining the same 32mm bore, 30mm stroke, output force, G1/8 port and mounting interface.
The bore is 32mm with a G1/8 air port and M10x1.25 rod thread. Force ratings are: 402N push / 345N pull at 0.5 MPa, 563N push at 0.7 MPa, 724N push at 0.9 MPa, and a theoretical max of 82 kgf at 1.0 MPa. Speed is 30-800 mm/s.
Request a Quote for the SAI32X30N
Send us the quantity and destination. We confirm price, stock and lead time on the SAI32X30N replacement — usually within 7-8 hours.