This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAI32X60, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SI32 Standard Air Cylinder SI32X60
The AirTAC SI32 Standard Air Cylinder SI32X60 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAI32X60, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAI32X60
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SI32 Standard Air Cylinder SI32X60
The AirTAC SI32X60 is a discontinued double-acting ISO 15552 profile cylinder with a 32mm bore and 60mm stroke. It delivers 402N push force at 0.5MPa via a G1/8 port. The direct replacement is the SAI32X60, matching the exact interface, force, and mounting.
This SKU lacks a magnet and cannot accept a sensor. The SAI upgrade features two Y-shaped one-way piston seals for low start-up pressure. For load holding, note that cushions only decelerate; explore SAIL or BSAI lock variants.
Airtac SI32 Standard Air Cylinder SI32X60 Technical Specifications
| Model | Airtac SI32 Standard Air Cylinder SI32X60 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAI32X60 |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAI32X60 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAI32X60 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SI32 Standard Air Cylinder SI32X60
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SI32 Standard Air Cylinder SI32X60 Is Used
Small Part Ejection
Ideal for pushing lightweight machined components out of a fixture using the 402N push force at 0.5 MPa.
Package Diverting
Deploys a 60mm stroke to deflect small cartons on a conveyor line where compact ISO 15552 mounting is required.
Clamp Actuation
Provides reliable secondary clamping pressure for thin workholding tasks without exceeding the 82 kgf maximum threshold.
Replacing the Airtac SI32 Standard Air Cylinder SI32X60 with the SAI32X60
To replace the SI32X60, order the SAI32X60. Confirm the ISO 15552 mounting interface, 32mm bore, 60mm stroke, G1/8 port (PT/G/NPT thread), and mounting accessory. Because this specific SKU has no magnet (-S), it cannot support position sensing; the SAI family uses current AirTAC switches if you add an S suffix. If you need more force, the adjacent 40mm bore yields 628N push at 0.5MPa. Remember that a standard cylinder drifts without live air; the cushion only decelerates. For secure holding, use an external pilot check valve, a rod lock, or the SAIL/BSAI lock variants.
Replacement checklist
- ✓ Same ISO 15552 interface → SAI32X60
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SI32 Standard Air Cylinder SI32X60 FAQ
Yes, the SI32X60 is discontinued. The direct replacement is the SAI32X60. It is dimensionally interchangeable per ISO 15552, retaining the same 32mm bore, 60mm stroke, output force, G1/8 port, and mounting interface.
This double-acting cylinder uses a G1/8 air port. The thrust figures are 402N push and 345N pull at 0.5 MPa, 563N push at 0.7 MPa, 724N push at 0.9 MPa, and a theoretical maximum force of 82 kgf at 1.0 MPa.
Request a Quote for the SAI32X60
Send us the quantity and destination. We confirm price, stock and lead time on the SAI32X60 replacement — usually within 7-8 hours.