This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ125X175-10, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10
The AirTAC SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10 is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø125mm bore and 175mm stroke, G1/2 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ125X175-10, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ125 mm
- Stroke175 mm
- Port sizeG1/2
- Acting typeDouble acting
- Rod threadM27×2.0
- StatusDiscontinued → SAIJ125X175-10
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10
The AirTAC SIJ125X175-10 is a double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 125 mm bore and 175 mm maximum stroke. An external stop screw lets you trim the extend stroke by up to 10 mm on-site, giving a usable 165-175 mm extension. The SIJ line is discontinued; the direct replacement is the SAIJ125X175-10, sharing the same interface, force, and adjust window.
The SAIJ successor improves reliability with an upgraded two Y-shaped one-way piston seal for low start-up pressure and long life. Note this SKU lacks a magnet (-S) so it cannot take a switch. The stop screw sets end position but is not a load lock; use an external rod lock or SAIL/BSAI variant for held loads.
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10 Technical Specifications
| Model | Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10 |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ125X175-10 |
| Bore size | Ø125 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | G1/2 |
| Rod thread | M27×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 40 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ125X175-10 carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø125mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 6136 N | 5734 N |
| 0.7 MPa | 8590 N | — |
| Max (@1.0 MPa) | 1251 kgf | |
The SAIJ125X175-10 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 125 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10 Is Used
Press Fit Calibration
Fine-tune the 165-175 mm extend stroke on-site to dial in exact press-fit depths for large bearings without re-engineering the entire fixture.
Pallet Positioning Stops
Adjust the end position by up to 10 mm to accommodate slight pallet length variances on a heavy-duty conveyor line.
Heavy Load Ejection
Trim the extend stroke precisely to eject 300 kg assemblies from a machine bed, ensuring the 125 mm bore force is applied exactly where needed.
Replacing the Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10 with the SAIJ125X175-10
To replace the discontinued SIJ125X175-10, order the direct replacement SAIJ125X175-10, matching the 125 mm bore, 175 mm stroke, and 10 mm adjust window. Reuse existing FA, LB, or TC ISO 15552 mounts. Because this SKU lacks the -S magnet, it cannot accept a magnetic switch; add external sensors if needed. For strokes of 300 mm or longer, carefully manage side loads to prevent rod wear. Remember the 10 mm stop screw adjusts end position but does not lock the load on air loss.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ125X175-10
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ125 Double Rod Adjustable Cylinder SIJ125X175-10 FAQ
Yes, the SIJ125X175-10 is discontinued. The direct replacement is the SAIJ125X175-10. It shares the same ISO 15552 interface, 125 mm bore, 175 mm stroke, 10 mm adjust window, G1/2 port, and mounting options, while adding an upgraded piston seal.
The external stop screw provides a 10 mm adjust window, allowing you to trim the 175 mm nominal extend stroke down to 165 mm. The stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ125X175-10
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ125X175-10 replacement — usually within 7-8 hours.