This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ32X75-75S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S
The AirTAC SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 75mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ32X75-75S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke75 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAIJ32X75-75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S
The AirTAC SIJ32X75-75S is a double-acting double-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 75 mm on-site, dropping the usable stroke from its 75 mm maximum down to 0 mm. This SIJ model is discontinued; the direct replacement is the SAIJ32X75-75S, retaining the same interface, force, and adjust window.
The SAIJ upgrade features a two Y-shaped one-way piston seal for lower start-up pressure and longer life. The stop screw sets end position only—it is not a load lock, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S Technical Specifications
| Model | Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ32X75-75S |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ32X75-75S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAIJ32X75-75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S Is Used
Light Duty Clamping
Field-tunes the extend position to clamp parts of varying widths without swapping cylinders.
Sorting Diverter
Adjusts the extend stop on-site to deflect packages of different sizes accurately.
Component Seating
Trims the stroke precisely to press-fit delicate parts without bottoming out.
Replacing the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S with the SAIJ32X75-75S
To replace the discontinued SIJ32X75-75S, specify SAIJ32X75-75S for an exact ISO 15552 direct match. The 75 mm adjust window allows maximum extend flexibility. Mounting options include FA, LB, and TC. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches (the SAIJ uses current switches). For this 75 mm stroke, side-load is minimal, but for any stroke >=300 mm ensure guide rails to prevent rod binding.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ32X75-75S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X75-75S FAQ
Yes, the SIJ32X75-75S is discontinued. The direct replacement is the SAIJ32X75-75S, offering the same ISO 15552 interface, 32 mm bore, 75 mm stroke, 75 mm adjust window, and G1/8 port.
The external stop screw window is 75 mm, allowing you to shorten the extend stroke by up to 75 mm on-site. The stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ32X75-75S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ32X75-75S replacement — usually within 7-8 hours.