This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is SAIJ80X75-10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the SAIJ80X75-10S in place of this model. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S
The AirTAC Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. This model is discontinued — the drop-in replacement is the SAIJ80X75-10S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ80 mm
- Stroke75 mm
- Port sizeG3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- StatusDiscontinued → SAIJ80X75-10S
About the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S
The AirTAC SIJ80X75-10S is a discontinued double-acting single-rod ISO 15552 adjustable-stroke cylinder. An external stop screw lets you trim the extend stroke by up to 10mm on-site, giving a usable 65-75mm stroke (75mm is the maximum). This 80mm bore uses a G3/8 port, M20x1.5 rod thread, and 36mm adjustable cushions, delivering 2513N push and 2268N pull at 0.5MPa. The exact drop-in replacement is the SAIJ80X75-10S, matching the interface, force, and mounting.
The SAIJ upgrade features an improved two-piece Y-shaped piston seal for lower start-up pressure and longer life. Computed buyer insight: safe working load is roughly 1508N (60% of the 0.5MPa push), allowing a 128kg vertical lift with a 2:1 margin. The -S suffix means a piston magnet is present for legacy CS1-B/DS1-B switches. The stop screw sets end position only; it is not a load lock, so use an external rod lock or SAIL/BSAI variant for held loads.
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S Technical Specifications
| Model | Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ80X75-10S |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ80X75-10S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
The SAIJ80X75-10S produces the same force from the same bore — a true drop-in on output. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S Is Used
Clamping Position Trimming
Allows operators to fine-tune the extend end position by up to 10mm on-site to accommodate material thickness variations without changing the cylinder.
Transfer Diverter Setup
Provides adjustable end-stop positioning for a 75mm stroke diverter gate, letting maintenance crews dial in the exact routing angle on the conveyor line.
Product Pusher Adjustment
Enables a 10mm reduction in the pusher extend stroke to handle slightly smaller carton formats on the fly, ensuring positive contact without repositioning the mount.
Replacing the Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S with the SAIJ80X75-10S
To replace the discontinued SIJ80X75-10S, map directly to the SAIJ80X75-10S (insert A after the leading S), keeping the 80mm bore, 75mm stroke, 10mm adjust window, and -S magnet. If sizing both ways, the neighbouring 63mm bore yields 1559N push at 0.5MPa, while the 100mm bore yields 3927N push at 0.5MPa. Choose the 10mm adjust window when you need minor field tuning of the extend end position. Mounting options include FA, LB, and TC brackets. The -S suffix ensures compatibility with legacy CS1-B/DS1-B sensors (current AirTAC switches on the SAIJ). Because the 75mm stroke is under 300mm, side-load rod deflection is minimal.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ80X75-10S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ80 Dual Axis Adjustable Cylinder SIJ80X75-10S FAQ
Yes, the SIJ80X75-10S is discontinued. The exact drop-in replacement is the SAIJ80X75-10S. It shares the same ISO 15552 interface, 80mm bore, 75mm stroke, 10mm adjust window, G3/8 port, and mounting options, but uses an upgraded piston seal.
The 80mm bore delivers 2513N push and 2268N pull at 0.5MPa, 3518N push at 0.7MPa, and 4523N push at 0.9MPa (theoretical max 513kgf at 1.0MPa). The external stop screw provides a 10mm adjust window, shortening the extend stroke from the 75mm maximum down to 65mm. The stop sets end position and is not a load lock.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ80X75-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ80X75-10S replacement — usually within 7-8 hours.