
The AirTAC SAIJ80 Adjustable Cylinder SAIJ80X75-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø80mm bore and 75mm stroke, G3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ80X75-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, providing a usable travel window of 65 to 75 mm for precise end-position tuning. The extruded aluminum barrel features sensor grooves on both sides, and this -S variant includes a magnet for direct compatibility with AirTAC CMSE reed and DMSE electronic solid-state switches.
This model utilizes a carbon steel piston rod with an M20x1.5 thread and a PT tapered port connection. The rear adjustment screw acts purely as a mechanical stop to dial in the exact retract distance during commissioning without needing external stops; it is not a locking device and will not hold a load without live air pressure. Air cushions at both ends manage deceleration, while the standard ISO 15552 mounting interface ensures broad dimensional interchangeability.
| Model | Airtac SAIJ80 Adjustable Cylinder SAIJ80X75-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | — |
| Max (@1.0 MPa) | 463 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 65-75 mm retract distance during machine setup to accommodate varying material thicknesses without swapping out the entire actuator.
Quickly fine-tune the end-of-stroke position on packaging lines during product size changeovers, minimizing downtime and avoiding external stopper hardware.
If your application needs lighter force, stepping down to a 63 mm bore yields 1559 N. The 10 mm adjustable window is perfect for fine-tuning short-stroke clamping or pressing actions on the fly. For load-holding without continuous air pressure, this cylinder is insufficient since the adjuster is only a stop; you should explore an AirTAC SAIL pneumatic lock or BSAI clamp-lock cylinder instead.
When replacing an ISO 15552 cylinder, verify the 80 mm bore, 75 mm nominal stroke, 10 mm adjustment range, PT port threads, and the -S magnet option. The SAIJ series supports a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR mounts. Although the stroke is short, always ensure proper alignment to avoid excessive side loading on the M20x1.5 rod.
Quick checklist
At the maximum 1.0 MPa pressure, it can deliver up to 513 kgf.
The rear adjuster screw allows you to mechanically shorten the effective stroke by up to 10 mm, creating a usable travel window of 65 to 75 mm. It functions strictly as a travel stop for position tuning and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.