This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU63X1010, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU63X1010
The AirTAC SU63-100 Standard Cylinder SU63X1010 is a double-acting profile-type standard cylinder with a Ø63mm bore and 1010mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU63X1010, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke1010 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAU63X1010
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU63X1010
The AirTAC SU63X1010 is a discontinued double-acting profile-type cylinder with a 63 mm bore and 1010 mm stroke, delivering 1559 N push force at 0.5 MPa. Because this SU series is end-of-life, you should order the direct replacement: the SAU63X1010. It retains the identical extruded aluminium body, 3/8" port, M16x1.5 rod thread, output force, and SC-series mounting accessories, fitting the same application seamlessly.
This non-magnetic SKU cannot accept a sensor, but upgrading to the SAU family enables modern CMSG/DMSG/EMSG switches if you add an -S option later. The SAU line also introduces the SAUF variant with a built-in 4M solenoid valve, a feature the SU never offered. Note that at 1010 mm, external guides are recommended to prevent rod bending.
Airtac SU63-100 Standard Cylinder SU63X1010 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU63X1010 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU63X1010 |
| Bore size | Ø63 mm |
| Stroke | 1010 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU63X1010 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAU63X1010 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU63X1010
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×1010 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU63X1010 Is Used
Long-Stroke Diversion
Pushes large cartons across a 1010 mm transfer gap with a safe 935 N working load, relying on external guides to prevent rod bending.
Pallet Push-Off
Ejects stacked goods from a roller bed using 1559 N of thrust at 0.5 MPa, dropping directly into the SAU63X1010 footprint.
Replacing the Airtac SU63-100 Standard Cylinder SU63X1010 with the SAU63X1010
To replace this discontinued SU63X1010, order the SAU63X1010 direct equivalent, verifying your 3/8" port, M16x1.5 rod thread, and SC-series mounting (LB/FA/FB/CA/CB). Since this specific SKU lacks a magnet (-S), it cannot support position sensing; if your machine now requires sensors, select an SAU63X1010-S and upgrade to the current CMSG/DMSG/EMSG switch family, as the legacy CS1-B/DS1-B units are obsolete. For force sizing, this bore yields 1559 N push at 0.5 MPa; if you need less force, step down to a 50 mm bore (982 N push), or step up to an 80 mm bore (2513 N push) for heavier loads. Because the stroke is 1010 mm, you must use external guides to prevent rod bending and side-load damage. Finally, a standard cylinder drifts on air loss—the cushion only decelerates near stroke end—so install an external rod lock or pilot-operated check valve for load holding.
Replacement checklist
- ✓ Same bore / stroke → SAU63X1010
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU63X1010 FAQ
Yes, the SU63X1010 is discontinued. The direct replacement is the AirTAC SAU63X1010. It shares the same 63 mm bore, 1010 mm stroke, 3/8" port, M16x1.5 rod thread, and SC-series mounting, so it fits the same envelope without modification.
At 0.5 MPa it provides 1559 N push and 1402 N pull; at 0.7 MPa it pushes 2182 N, and the theoretical maximum is 318 kgf at 1.0 MPa. This specific SKU has no magnet (-S), so it cannot take a sensor. If sensing is needed, the SAU replacement offers an -S option that uses current CMSG/DMSG/EMSG switches instead of the obsolete CS1-B/DS1-B.
Related AirTAC SAU Cylinders
Request a Quote for the SAU63X1010
Send us the quantity and destination. We confirm price, stock and lead time on the SAU63X1010 replacement — usually within 7-8 hours.