This model is discontinued
AirTAC has phased out the SU series. You can still order this code here: we ship the direct replacement SAU63X370, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAU replacement uses the same profile body, bore, stroke, force and SC-series mounting. It moves to the current CMSG / DMSG / EMSG sensor switches (the SU used CS1-B / DS1-B) and adds the SAUF valve-integrated option.
Airtac SU63-100 Standard Cylinder SU63X370
The AirTAC SU63-100 Standard Cylinder SU63X370 is a double-acting profile-type standard cylinder with a Ø63mm bore and 370mm stroke, 3/8" air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAU63X370, which matches its bore, stroke, force and mounting.
- BoreØ63 mm
- Stroke370 mm
- Port size3/8"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → SAU63X370
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SU63-100 Standard Cylinder SU63X370
The AirTAC SU63X370 is a discontinued double-acting profile cylinder with a 63 mm bore and 370 mm stroke. It delivers 1559 N push force at 0.5 MPa through a 3/8" port. The direct replacement is the SAU63X370, matching the bore, stroke, force, and SC-series mounting.
Buyers gain a compact extruded body shorter than same-bore ISO cylinders. The SAU upgrade uses CMSG/DMSG/EMSG sensors and adds a SAUF valve option. Note this non-magnet SKU cannot take a switch.
Airtac SU63-100 Standard Cylinder SU63X370 Technical Specifications
| Model | Airtac SU63-100 Standard Cylinder SU63X370 |
|---|---|
| Series | SU profile-type cylinder (discontinued) |
| Replacement | SAU63X370 |
| Bore size | Ø63 mm |
| Stroke | 370 mm |
| Acting type | Double acting |
| Port size | 3/8" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max standard stroke | Up to 1500 mm |
Specifications follow the official AirTAC SU datasheet (now discontinued). The SAU63X370 carries the same ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1402 N |
| 0.7 MPa | 2182 N | — |
| Max (@1.0 MPa) | 318 kgf | |
The SAU63X370 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SU63-100 Standard Cylinder SU63X370
| SU | Profile-type standard cylinder (discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×370 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SU-family variants: SUD (double rod), SUJ (adjustable stroke) — each maps to its SAU equivalent (SUD→SAUD, SUJ→SAUJ). The current SAU line adds the SAUF valve-integrated option.
Where the Airtac SU63-100 Standard Cylinder SU63X370 Is Used
Pallet Diversion
Pushes loaded pallets sideways at 90 degrees using a safe 935 N working load, with the 370 mm stroke clearing the conveyor frame.
Component Ejection
Ejects machined metal parts from a fixture over 370 mm, relying on adjustable end cushions to decelerate the 20 mm rod before impact.
Replacing the Airtac SU63-100 Standard Cylinder SU63X370 with the SAU63X370
To replace the SU63X370, order the SAU63X370 and confirm the 3/8" port, M16x1.5 rod thread, and SC-series mounts (LB/FA/FB/CA/CB). This non-magnet SKU cannot accept a sensor; the SAU -S variant uses CMSG/DMSG/EMSG switches. If you need higher force, the 80 mm bore offers 2513 N push at 0.5 MPa; for less, the 50 mm bore gives 982 N. At 370 mm, prevent rod bending by using an external guide. The cushion only decelerates; use a rod lock or pilot check valve to hold loads. The SAUF variant integrates a 4M valve.
Replacement checklist
- ✓ Same bore / stroke → SAU63X370
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S): sensor family CS1-B → CMSG
- ✓ Mounting reused (FA/FB/CA/CB/LB)
- ✓ Need a built-in valve? → SAUF
Airtac SU63-100 Standard Cylinder SU63X370 FAQ
Yes, the SU63X370 is discontinued. The direct replacement is the SAU63X370. It matches the 63 mm bore, 370 mm stroke, 1559 N force, 3/8" port, and SC-series mounting accessories. The SAU body also offers a new SAUF built-in valve option.
It provides 1559 N push and 1402 N pull at 0.5 MPa, 2182 N push at 0.7 MPa, and a 318 kgf maximum at 1.0 MPa. This specific SKU lacks a magnet and cannot take a sensor. If you order the SAU -S version, it uses current CMSG/DMSG/EMSG switches.
Request a Quote for the SAU63X370
Send us the quantity and destination. We confirm price, stock and lead time on the SAU63X370 replacement — usually within 7-8 hours.