Airtac TACED Guided Compact Cylinder TACED50X100S
The AirTAC TACED Guided Compact Cylinder TACED50X100S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X100S
Double acting and double rod, the TACED50X100S pushes a rod out of both covers, so the 50 mm bore delivers the same 881.2 N at 0.5 MPa (1233.7 N at 0.7 MPa) in either direction. Twin guide rods on a yoke keep the tooling from rotating and carry side load, so a gripper or press plate stays square without an external guide. The optional -S magnet is fitted on this model, letting CMSE or DMSE switches report end positions directly on the body.
The ISO 21287 compact body is hard-anodized aluminium with an S45C hard-chrome rod, and its short frame saves about 50% of the mounting length of an ISO 15552 profile cylinder, which helps it slide into tight guarding on packaging and assembly machines. A fixed TPU bumper at each end absorbs end-of-stroke shock.
Airtac TACED Guided Compact Cylinder TACED50X100S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X100S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X100S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X100S Is Used
Symmetric press or riveting head
Equal 881.2 N force in both directions lets the same cylinder form and retract a riveting head on an electronics assembly line, with the twin guide yoke keeping the punch square.
Bidirectional pusher on a bottling line
A rod at each cover means one cylinder can divert trays onto a conveyor from either face, with the fitted -S magnet driving CMSE switches for position feedback at 30-500 mm/s.
Non-rotating gripper plate on a robot cell
The twin guide rods stop a pick-and-place gripper plate from spinning while carrying side load, so no external guide rail is needed in the tight envelope of a compact gantry.
Is the Airtac TACED Guided Compact Cylinder TACED50X100S the Right Cylinder?
At 881.2 N per side at 0.5 MPa, this 50 mm unit sits between the 40 mm bore (571.8 N) and the 63 mm bore (1458.1 N); step down for lighter clamping or up for heavier press-fit work. Strokes to 100 mm are standard for this bore, and the female M10x1.5 rod thread takes standard rod attachments. It does not hold position if air is lost, so add a rod lock or pilot check valve for a held load. FB flange mounting is available, and the fitted -S magnet means CMSE / DMSE switches can be added without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X100S FAQ
Yes. Because a rod exits both covers, both sides work on the rod-side area, so output is equal both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 50 mm bore takes a 1/8" port with a female M10x1.5 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow jigs and guarded frames. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount in the body slots for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange mounting is available; confirm exact outline dimensions from the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.