Airtac TACED Guided Compact Cylinder TACED50X15
The AirTAC TACED Guided Compact Cylinder TACED50X15 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X15
The TACED50X15 is a double acting, double rod compact cylinder built to the ISO 21287 short-body format. A rod exits both covers, so the 50 mm bore delivers an equal 881.2 N in each direction at 0.5 MPa (1233.7 N at 0.7 MPa), because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 15 mm stroke suits short, fast moves at 30-500 mm/s.
The hard-anodized aluminium body with an S45C hard-chrome plated 16 mm rod shrugs off wear in daily production, and a fixed TPU bumper absorbs end-of-stroke shock at both ends. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. Air supply is 0.15-1.0 MPa (22-145 psi) through the 1/8" port, with a female M10x1.5 rod thread.
Airtac TACED Guided Compact Cylinder TACED50X15 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X15 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X15
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X15 Is Used
Short-stroke press fitting
The 15 mm stroke and 881.2 N both ways suit pressing bearings or bushings into aluminium housings on an assembly cell, with the twin guide yoke keeping the punch square.
Two-sided gripper actuation
A rod out of each cover lets one cylinder close and open a 45 kg-class clamp jaw with equal force, eliminating a second cylinder on robotic handling fixtures.
Packaging line reject pusher
Fast 30-500 mm/s cycling and the compact body fit a reject station that kicks underfilled cartons sideways on a conveyor without stealing line length.
Is the Airtac TACED Guided Compact Cylinder TACED50X15 the Right Cylinder?
At 881.2 N per side, the 50 mm bore sits mid-range: step down to the 40 mm TACED (571.8 N) for lighter clamps, or up to the 63 mm (1458.1 N) when the part is heavier. If you only need force one way, the single-rod TACE gives a longer body for the same bore. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. The FB flange, CA, CB, CR and FTC mountings all fit, and the optional -S magnet enables CMSE / DMSE switches; without -S there is no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X15 FAQ
Yes - the double rod means both sides see the rod-side area, so output is equal both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port takes air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. For sensing, order the optional -S magnet version, which allows CMSE or DMSE switches along the body slots; the standard TACED50X15 has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.