Airtac TACED Guided Compact Cylinder TACED50X25S
The AirTAC TACED Guided Compact Cylinder TACED50X25S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X25S
Double acting and double rod, the TACED50X25S pushes with an identical 881.2 N at 0.5 MPa in each direction because a rod leaves both covers and every stroke works on the rod-side area. At 0.7 MPa that rises to 1233.7 N either way, with a ceiling of 179.7 kgf at 1.0 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide - a real edge over a plain compact cylinder.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. The hard-anodized aluminium body carries a roller-burnished bore, the S45C rod is hard-chrome plated, and fixed TPU bumpers absorb end-of-stroke energy at both ends. This model carries the optional -S magnet, so CMSE / DMSE switches can be mounted for end-position sensing.
Airtac TACED Guided Compact Cylinder TACED50X25S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X25S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X25S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X25S Is Used
Fixture clamping on a CNC machining line
The equal 881.2 N clamp in both directions lets one cylinder swing a clamp arm open and closed with identical force, while the twin guide yoke keeps the clamp pad from twisting against the workpiece.
Short-stroke part pusher on packaging conveyors
A 25 mm stroke is ideal for nudging cartons or blisters sideways at a reject gate, and the compact body fits where a full-length profile cylinder would overhang the frame.
Is the Airtac TACED Guided Compact Cylinder TACED50X25S the Right Cylinder?
At 881.2 N per direction the 50 mm bore sits mid-range: step down to the 40 mm bore (571.8 N at 0.5 MPa) for lighter clamping, or up to the 63 mm bore (1458.1 N) when the load grows. The 25 mm stroke suits short push, press or transfer moves; longer standard strokes are available for this bore. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a held load matters. FB flange mounting is offered, and the -S magnet on this model pairs with CMSE / DMSE switches; ports are 1/8" and the rod end takes an M10x1.5 female thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X25S FAQ
Yes - it is a double-rod cylinder, so a rod exits both covers and both strokes act on the rod-side area. Output is 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, identical in each direction, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 16 mm hard-chrome rod ends in an M10x1.5 female thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and gantries. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly in the body slots for end-position signals. FB flange mounting is available, fixed TPU bumpers absorb end-of-stroke shock at both covers, and the piston does not hold position when air is lost - use a rod lock or pilot check valve for a held load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.