Airtac TACED Guided Compact Cylinder TACED50X30
The AirTAC TACED Guided Compact Cylinder TACED50X30 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X30
The TACED50X30 is a double acting, double rod compact cylinder built to the ISO 21287 short-body format, with a 50 mm bore and a 30 mm stroke. Because a rod exits both covers, the output force is equal in each direction - 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa - since both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. Air supply is 0.15-1.0 MPa (22-145 psi) with speed from 30 to 500 mm/s.
The hard-anodized aluminium body is roller-burnished for wear life, and the 16 mm S45C piston rod carries hard-chrome plating. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes the 50 mm bore easy to tuck into tight jigs and guarding. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the female M10x1.5 rod thread suits standard tooling.
Airtac TACED Guided Compact Cylinder TACED50X30 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X30 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X30
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X30 Is Used
Fixture clamping in machining cells
The 881.2 N clamping force in both directions suits a CNC fixture that clamps and unclamps a steel workpiece with the same rated push, and the twin guide rods keep the clamp plate square to the datum.
Push-pull transfer on assembly stations
Equal force both ways lets one 50 mm bore push a pallet into position and retract it under load, with the 30 mm stroke fitting a short station pitch inside tight guarding.
Is the Airtac TACED Guided Compact Cylinder TACED50X30 the Right Cylinder?
At 881.2 N per side at 0.5 MPa, the 50 mm bore sits between the 40 mm bore (571.8 N) and the 63 mm bore (1458.1 N), so pick 50 mm when a 40 mm unit is under-rated but 63 mm is oversized for the envelope. The 30 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it ships as a standard build. If the load must stay put when air is lost, add a rod lock or pilot check valve - the piston will drift on its own. Mounting is FB flange; order the -S suffix if you later want CMSE / DMSE switches, since this code has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X30 FAQ
Yes. As a double rod cylinder, a rod exits both covers and both sides see the rod-side area, so output is equal each way: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed range 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 50 mm bore fits shallow jigs and gantries. Sensing is possible only with the optional -S magnet code, which enables CMSE / DMSE switches; this TACED50X30 has no magnet fitted. Ends are decelerated by a fixed TPU bumper, and mounting is FB flange with a female M10x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.