Airtac TACED Guided Compact Cylinder TACED50X60
The AirTAC TACED Guided Compact Cylinder TACED50X60 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X60
A double acting, double rod compact cylinder built to ISO 21287, the TACED50X60 pushes a 16 mm rod out of BOTH covers, so the 50 mm bore delivers an identical 881.2 N in each direction at 0.5 MPa (1233.7 N at 0.7 MPa). Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames where a full-length profile cylinder cannot. A fixed TPU bumper at each end absorbs end-of-stroke shock. Female M10x1.5 rod thread, 1/8" PT ports. Note it drifts if air is lost - add a rod lock or pilot check valve to hold a load.
Airtac TACED Guided Compact Cylinder TACED50X60 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X60 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X60
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X60 Is Used
Symmetric press or rivet head
Equal 881.2 N in both directions lets one cylinder form or stake a bracket on the forward stroke and eject the finished part on the return, with the twin guide yoke keeping the punch square to the die.
Bidirectional conveyor stopper
A through-rod blade that rises from either side of a packaging line, using the same 881.2 N force to stop cartons travelling in either direction at up to 500 mm/s actuation speed.
Is the Airtac TACED Guided Compact Cylinder TACED50X60 the Right Cylinder?
At 881.2 N per side, the 50 mm bore sits between the 40 mm (571.8 N) and 63 mm (1458.1 N) double-rod classes - step down for lighter pick-and-place heads, up for heavier clamping. The 60 mm stroke is well inside the 250 mm standard range for this bore, so it ships as a catalog item. Choose the -S suffix if you need the optional magnet for CMSE / DMSE switches; without it no sensor can be fitted. FB flange mounting is available. Because the piston drifts when pressure drops, pair it with a pilot check valve for held loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X60 FAQ
Yes - the double rod design means both sides see the rod-side area, so output is equal both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
It is an ISO 21287 compact cylinder whose short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB flange as a mounting option. Sensing is not fitted as standard: order the optional -S magnet version to run CMSE or DMSE switches along the body's magnet slots; the plain TACED50X60 carries no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.