Airtac TACED Guided Compact Cylinder TACED50X70S
The AirTAC TACED Guided Compact Cylinder TACED50X70S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X70S
Double acting with a rod leaving both covers, the TACED50X70S pushes and pulls with identical force: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa in either direction, because both chambers act on the same rod-side area. The 50 mm bore drives a 16 mm rod through a 70 mm stroke, with a fixed TPU bumper at each end absorbing end-of-stroke shock. Twin guide rods on the yoke stop the tooling from rotating and carry side load, so a gripper or press plate stays square without an external guide.
The body is the short ISO 21287 compact format in hard-anodized aluminium, saving about 50% of the mounting length of an ISO 15552 profile cylinder, which makes it easy to fit into tight jigs, guarding and gantries. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, and the -S code on this model means the magnet is fitted, so CMSE / DMSE switches can be mounted directly on the body slots.
Airtac TACED Guided Compact Cylinder TACED50X70S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X70S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X70S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X70S Is Used
Fixture clamping on CNC machining centers
The equal 881.2 N push and pull clamps and releases jigs with the same force, and the twin guide yoke keeps the clamp plate square to the fixture without side guides.
Pusher stations on packaging conveyors
A 70 mm stroke diverts cartons or trays at up to 500 mm/s, while the short ISO 21287 body fits the narrow space alongside the conveyor frame.
Non-rotating gripper actuation in assembly cells
Twin guide rods stop the gripper twisting when closing on parts, and the fitted -S magnet feeds CMSE / DMSE position signals back to the PLC.
Is the Airtac TACED Guided Compact Cylinder TACED50X70S the Right Cylinder?
At 881.2 N per side, the 50 mm bore sits mid-range: step down to the 40 mm bore (571.8 N) for lighter pick-and-place, or up to the 63 mm bore (1458.1 N) when the load grows. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must be held. This model carries the -S magnet for CMSE / DMSE switching, uses a female M10x1.5 rod thread with a 1/8" PT port, and FB flange mounting is available.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X70S FAQ
Yes. Because a rod exits both covers, both strokes act on the rod-side area, so force is equal either way: 881.2 N at 0.5 MPa, 1233.7 N at 0.7 MPa, and a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short-body format saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machinery. A fixed TPU bumper at each end absorbs end-of-stroke energy; it does not hold or brake a load, so use a rod lock or pilot check valve where position must be kept. The -S magnet on this model allows CMSE / DMSE switches in the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.