Airtac TACED Guided Compact Cylinder TACED50X75S
The AirTAC TACED Guided Compact Cylinder TACED50X75S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X75S
Double acting with a through rod exiting both covers, the TACED50X75S delivers 881.2 N at 0.5 MPa in each direction, because both strokes work on the rod-side area. The twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 75 mm stroke sits well inside the 250 mm maximum standard stroke for this 50 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guards and gantries. The hard-anodized aluminium body carries an S45C hard-chrome rod, a fixed TPU bumper absorbs end-of-stroke energy at both ends, and the -S magnet this model carries lets you mount CMSE / DMSE switches for end-position sensing.
Airtac TACED Guided Compact Cylinder TACED50X75S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X75S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X75S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X75S Is Used
Double-sided jig clamping
The through rod clamps or releases from either cover with an identical 881.2 N at 0.5 MPa, ideal for a machining fixture that needs equal force on both faces of a workpiece.
Small press and forming station
With about 54 kgf of usable working force at 0.5 MPa and the twin guide yoke keeping the punch non-rotating, this unit suits light staking, marking and forming on electronics assemblies.
Position-monitored gantry actuator
The -S magnet plus CMSE / DMSE switches give end-position feedback in the tight headroom of a gantry, where the short ISO 21287 body saves roughly half the length of a profile cylinder.
Is the Airtac TACED Guided Compact Cylinder TACED50X75S the Right Cylinder?
For a 50 mm bore the 881.2 N per direction at 0.5 MPa (1233.7 N at 0.7 MPa) suits clamping, pressing and lift tasks in the 40-60 kg class. Step down to the 40 mm bore (571.8 N at 0.5 MPa) for lighter tooling, or up to the 63 mm bore (1458.1 N) when the load grows. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, ports are 1/8". Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must be held. FB flange mounting is available, and this -S model already carries the magnet for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X75S FAQ
Yes - the double-rod design means a rod exits both covers and both strokes work on the rod-side area, so output is equal both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, on air filtered to 40 um.
This -S version carries the optional magnet, so AirTAC CMSE reed or DMSE solid-state switches mount directly in the body slots for position feedback. The ISO 21287 compact aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FB flange mounting is offered. A fixed TPU bumper at each end absorbs end-of-stroke energy; outline dimensions are not listed here - confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.