Airtac TACED Guided Compact Cylinder TACED50X80
The AirTAC TACED Guided Compact Cylinder TACED50X80 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X80
Double acting and double rod, the TACED50X80 pushes a rod out of both covers, so its 50 mm bore delivers an identical 881.2 N at 0.5 MPa (1233.7 N at 0.7 MPa) in each direction - there is no weaker return stroke. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide. The rod end carries a female M10x1.5 thread and the air port is 1/8" PT.
The hard-anodized aluminium body is an ISO 21287 compact build, saving about 50% of the mounting length of an ISO 15552 profile cylinder, which makes it easy to drop into tight jigs and guarding. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet (not fitted on this code) enables CMSE / DMSE switches.
Airtac TACED Guided Compact Cylinder TACED50X80 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X80 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X80
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X80 Is Used
Clamp-and-press fixture
The 881.2 N both-ways force clamps a machined aluminium housing in a CNC fixture and retracts with the same power, while the twin guide yoke keeps the clamp pad from twisting.
Carton push-off station
An 80 mm stroke ejects filled cartons from a conveyor lane at up to 500 mm/s, and the equal return force resets the pusher plate without a separate return cylinder.
Is the Airtac TACED Guided Compact Cylinder TACED50X80 the Right Cylinder?
At 50 mm bore this sits in the mid-force band: step down to TACED40X80 for 571.8 N at 0.5 MPa, or step up to TACED63X80 when you need 1458.1 N. Both directions are equal, so sizing the return stroke needs no derating. Remember the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. FB flange mounting suits fixed jig plates, and if you need position sensing order the -S code, since this standard version has no magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X80 FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so output is equal both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 16 mm rod ends in a female M10x1.5 thread with a 1/8" PT port.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow jigs and guarded gantries. Position sensing requires the optional -S magnet code; this standard TACED50X80 has no magnet, so CMSE or DMSE switches cannot be read on it. Mounting is FB flange, and a fixed TPU bumper at each end absorbs end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.