Airtac TACED Guided Compact Cylinder TACED63X100S
The AirTAC TACED Guided Compact Cylinder TACED63X100S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 100mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X100S
Double acting and double rod, the TACED63X100S pushes a 63 mm piston through a 100 mm stroke with a rod leaving both covers, so the force is identical in each direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling from rotating and carry side load, keeping a gripper or press plate square without any external guide. The magnet is the -S option this model carries, so CMSE or DMSE reed and solid-state switches mount directly on the body slots.
The hard-anodized aluminium body with an S45C hard-chrome rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it drops into tight gantries and guarding.
Airtac TACED Guided Compact Cylinder TACED63X100S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X100S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X100S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X100S Is Used
Symmetric press or riveting head
Equal 1458.1 N force on approach and return suits a riveting or marking head on a fixture bench, where the twin guide yoke keeps the tool square through the 100 mm stroke.
Palletizer push-off arm
A push-off arm on a case palletizer gets about 89 kg of usable push at 0.5 MPa in both directions, so the same cylinder can extend and retract the load without a larger bore.
Is the Airtac TACED Guided Compact Cylinder TACED63X100S the Right Cylinder?
At 1458.1 N per direction, bore 63 sits between bore 50 (881.2 N at 0.5 MPa) and bore 80 (2356.2 N at 0.5 MPa); step down for lighter clamping, up when the load approaches 1200 kgf. If the machine must hold position when air is lost, add a rod lock or pilot check valve, since the piston drifts without air. This model already carries the -S magnet for CMSE / DMSE switches, and FB flange mounting is available; the rod end is female M10x1.5 with a 1/8" PT port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X100S FAQ
Yes. Because a rod exits both covers, both sides work on the rod-side area, so output is equal each way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a maximum of 297.4 kgf at 1.0 MPa. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, air filtered to 40 um.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE / DMSE switches can be fitted; FB flange mounting is available and the rod end is female M10x1.5.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.