Airtac TACED Guided Compact Cylinder TACED63X25
The AirTAC TACED Guided Compact Cylinder TACED63X25 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X25
Double acting with a through rod that exits both covers, the TACED63X25 delivers 1458.1 N in either direction at 0.5 MPa because both strokes work on the rod-side area - there is no weaker pull stroke. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 63 mm bore sits in the mid-heavy class, and at 0.7 MPa the same cylinder reaches 2041.3 N both ways.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight welding fixtures and machine guards a full-length body cannot enter. A hard-anodized aluminium body carries an S45C hard-chrome plated rod, and fixed TPU bumpers at each end absorb end-of-stroke shock. The optional -S magnet enables CMSE / DMSE switches; this non-S model has no magnet fitted.
Airtac TACED Guided Compact Cylinder TACED63X25 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X25 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X25
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X25 Is Used
Weld fixture clamping
The 1458.1 N symmetric clamp at 0.5 MPa holds steel brackets in a jig from either side, and the twin guide yoke keeps clamp pads square to the part without extra guiding.
Short-stroke press station
A 25 mm stroke is ideal for staking or marking terminals on an electronics assembly line, where the compact body fits inside a guarded machine frame.
Reciprocating transfer slide
Equal force both directions moves a small pallet back and forth on an automation cell, with the non-rotating yoke keeping the tooling plate aligned stroke after stroke.
Is the Airtac TACED Guided Compact Cylinder TACED63X25 the Right Cylinder?
At 63 mm bore this model gives 1458.1 N per direction at 0.5 MPa - step down to TACED50X25 (881.2 N) for lighter clamping, or up to TACED80X25 (2356.2 N) when the job needs nearly double the thrust. The 25 mm stroke suits short-travel press, clamp and gauge positions. Air supply is 0.15-1.0 MPa (22-145 psi) with speed 30-500 mm/s. It does not hold position if air is lost - add a rod lock or pilot check valve for a held load. Mounting is FB flange, rod end is female M10x1.5, and the -S code is required if you want CMSE / DMSE switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X25 FAQ
Yes - the double rod design means both strokes act on the rod-side area, so force is equal either way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. Maximum force at 1.0 MPa is 297.4 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 16 mm rod ends in a female M10x1.5 thread with a 1/8" port.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow fixtures and guarded frames. Fixed TPU bumpers at both ends absorb end-of-stroke energy but do not lock or hold a load - use a rod lock or pilot check valve for that. Switch sensing needs the optional -S magnet code; with it, CMSE / DMSE switches mount in the body slots. FB flange mounting is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.