Airtac TACED Guided Compact Cylinder TACED63X35
The AirTAC TACED Guided Compact Cylinder TACED63X35 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X35
Double acting with a through rod at both covers, the TACED63X35 delivers 1458.1 N in each direction at 0.5 MPa (2041.3 N at 0.7 MPa) because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 63 mm bore drives a 16 mm rod through a 35 mm stroke at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. A hard-anodized aluminium body pairs with an S45C hard-chrome rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi), filtered to 40 um.
Airtac TACED Guided Compact Cylinder TACED63X35 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X35 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X35
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X35 Is Used
CNC fixture clamping
The twin guide yoke keeps a clamp plate square over the 35 mm stroke, with about 875 N of usable force at 0.5 MPa holding machined parts in a fixture.
Palletizer pusher
Equal 1458.1 N output both ways suits a pusher that must extend and retract with the same authority on a palletizing conveyor line.
Bench press station
A short-stroke marking or staking press: the compact body fits under a low gantry while the twin rods stop the punch rotating.
Is the Airtac TACED Guided Compact Cylinder TACED63X35 the Right Cylinder?
At 1458.1 N per side, this 63 mm unit sits between the 50 mm bore (881.2 N) and the 80 mm bore (2356.2 N) at 0.5 MPa - step down for lighter clamping, up for heavy tooling. The 35 mm stroke is within the standard range for bore 63, so no made-to-order build is needed. Remember the piston drifts if air is lost; add a rod lock or pilot check valve where a load must stay put. Mounting is the FB flange, and the optional -S magnet enables CMSE / DMSE switches - without that code no sensor can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X35 FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes act on the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in extend and retract, with a maximum of 297.4 kgf at 1.0 MPa.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange mounting is available. Position sensing requires the optional -S magnet code; only then can CMSE or DMSE switches be mounted on the body slots. The rod end carries an M10x1.5 female thread and the air port is 1/8".
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.