verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG40 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG40X20SKF

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X20SKF from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke20 mm
  • StopperLever roller, adjustable oil cushion, self-lock
  • MagnetMagnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ40 mm
$113.28 $120.78Save 6%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG40 stroke, stopper and magnet on one page All TWG40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG40X20SKF

Ordering code TWG40X20SKF reads from the AirTAC TWG table as a 40 mm bore, 20 mm stroke, double acting stopper cylinder with the K lever roller and adjustable oil cushion, plus the F self-lock. The self-lock keeps the lever from springing back, so a stopped pallet or box is not shoved backwards by the lever when the cylinder vents, which matters wherever load position must hold after a stop.

Mounting is a flange whose height adjusts on the machine, letting the roller line be matched to the conveyor. Proof pressure is 1.5 MPa (215 psi) against a 0.15-1.0 MPa working range, and the S magnet lets position sensors confirm whether the stopper is up or down. No lubrication is required.

Airtac TWG Stop Cylinder TWG40X20SKF Technical Specifications

Order codeTWG40X20SKF
ProductAdjustable mounting height Stopper Cylinder
Stroke20 mm
StopperLever roller, adjustable oil cushion, self-lock
MagnetMagnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ40 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Compare TWG40X20SKF with its neighbours in the code table: TWG40X20SK gives the same lever roller and oil cushion but without self-lock, while TWG40X20SR swaps the lever for a plain roller head. The F suffix is defined only for the lever roller stopper, so self-lock cannot be added to C round rod, B flat rod or R roller versions. Strokes of 25 and 30 mm remain available at the same 40 mm bore.

Applications

warehouse

Order-picking park gates

Loads park against the stopper between picks; the F self-lock stops the lever from springing back and pushing the parked load backwards.

conveyor_belt

Accumulation zone release

The adjustable oil cushion softens the catch of arriving pallets, and self-lock holds the lever steady until the 20 mm stroke lowers the stopper.

sensors

Feedback-checked stop stations

The S magnet allows magnetic switches to verify stopper position, so downstream cycles start only when the stopper state is confirmed.

FAQ

What are the key figures of the TWG40X20SKF?

40 mm bore, 20 mm stroke (tolerance +1.0/0 mm), double acting, flange mounting with adjustable height, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, lever roller stopper with adjustable oil cushion and F self-lock, magnet included.

Why order the F self-lock on this cylinder?

The self-lock prevents the lever roller from springing back and pushing the stopped load backwards. In the TWG40 ordering code, F applies only to the lever roller stopper (K), so it is the right choice when load position must stay fixed after the stop.