Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X25R from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWG40X25R is the roller-head build of the TWG40 stopper cylinder: a Dia 40 mm bore, double acting body with 25 mm stroke, carried on a flange whose mounting height can be adjusted on the machine. The roller stopper presents a rolling contact to the leading edge of pallets and boxes, and the thicker piston rod of the TWG40 series resists impact better than a thin rod.
The R suffix selects the roller stopper, and the absent S means no magnet is built in, so external detection must be added if position feedback is needed. It runs on 0.15-1.0 MPa of air filtered by a 40 um element, with a bumper cushion, PT1/8 ports, a -20 to +70 C working range and no lubrication required.
| Order code | TWG40X25R |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 25 mm |
| Stopper | Roller |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø40 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Among the TWG40x25 heads, pick this R roller over TWG40X25SC (round rod) or TWG40X25SB (flat rod with magnet) when rolling contact suits the product flow. If you need a softer stop, the TWG40X25SK lever roller uses an adjustable oil shock absorber and is the only head that can take the F self-lock option; if you need position sensing, order TWG40X25SR, the same roller head with a magnet.
The roller head meets the leading edge of a moving pallet while the adjustable flange sets stopper height to the pallet base; double acting air raises and lowers the stop.
The 25 mm lift raises the roller out of the product path and lowers it again to divert boxes between conveyor lanes.
The bumper cushion and the impact-resistant thick piston rod take repeated stops at 0.15-1.0 MPa on an air line filtered by a 40 um element, with no lubrication.
Dia 40 mm bore, 25 mm stroke (+1.0/0 tolerance), roller stopper, double acting, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no lubrication required.
No. The ordering code has no S, so no magnet is built in; for built-in position feedback choose TWG40X25SR, the roller head with magnet, or fit external detection. Exact roller head dimensions: confirm from the datasheet.