Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X25SB from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
In the TWG40x25 group the B code selects the flat rod stopper head and the S adds a magnet, so TWG40X25SB is the flat-faced, sensor-ready build of the Dia 40 mm stopper cylinder. Air on both sides (double acting) lifts and retracts the 25 mm stop, and the flange mounting lets you set stopper height directly on the machine.
The magnet works with position sensors for end-of-stroke confirmation (sensor details: confirm from the datasheet). Supply air is 0.15-1.0 MPa filtered by a 40 um element, ports are PT1/8, proof pressure is 1.5 MPa (215 psi), the cushion is a bumper, and the cylinder follows JIS standards with no lubrication needed.
| Order code | TWG40X25SB |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 25 mm |
| Stopper | Flat rod |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø40 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Neighbors: TWG40X25B is the same flat rod head without magnet, TWG40X25SC swaps to a round rod head while keeping the magnet, and TWG40X25SK moves to a lever roller with an adjustable oil cushion. Only the K lever roller can carry the F self-lock option, so if a springing lever must not push the stopped load backwards, that sibling is the one to quote.
The built-in magnet lets position sensors report stopper up and down to the controller before the next pallet is released onto the line.
The flat rod face presents a broad contact edge to cartons arriving on a conveyor at 0.15-1.0 MPa working pressure.
Double acting control gives positive 25 mm up and down strokes, holding and releasing workpieces at an assembly station fed by a conveyor.
Dia 40 mm bore, 25 mm stroke with +1.0/0 tolerance, flat rod stopper with magnet, double acting, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion.
The B suffix gives a flat contact face instead of the C round rod or R roller. With the S magnet in this code the stopper position can be sensed directly; exact head dimensions: confirm from the datasheet.