Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X25SK from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
Part of the AirTAC TWG series, the TWG40X25SK is a double acting stopper cylinder with a Dia 40 mm bore and a 25 mm stroke, one of the three catalog strokes (20, 25 and 30 mm, tolerance +1.0/0). Its flange mounting is adjustable in height, so the stopper can be set to the exact pallet or box height on the conveyor frame.
The K option in the order code specifies the lever roller stopper with an adjustable oil cushion, which softens the contact when a moving load arrives. The S option adds a magnet so position sensors can report up and down states to the controller. Air runs through a PT1/8 port at 0.15-1.0 MPa, and the series needs no lubrication.
| Order code | TWG40X25SK |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 25 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | Magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø40 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Pick TWG40X25SK when the stop must be soft and monitored: the K lever roller with adjustable oil cushion absorbs arrival impact and the magnet feeds a position signal. If the load must not be pushed back after stopping, order TWG40X25SKF, which adds the F self-lock. If a simple roller head is enough, TWG40X25SR is the sibling code, and round or flat rod heads are coded TWG40X25C and TWG40X25B. Stroke siblings are TWG40X20SK and TWG40X30SK; size the bore with the impact load and speed charts in the catalog.
The S magnet lets a position sensor confirm stopper up and down states on each cycle of a palletized conveyor station.
The lever roller with adjustable oil cushion eases the arrival of cartons, so the Dia 40 bore stopper does not hammer the load.
The adjustable mounting height flange lets this 25 mm stroke stopper be aligned to different pallet heights on one machine frame.
Double acting stopper cylinder, Dia 40 mm bore, 25 mm stroke with tolerance +1.0/0, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, lever roller stopper with adjustable oil cushion, magnet fitted, no lubrication required.
The adjustable oil cushion softens the impact as a load arrives, protecting the stopper and the product, while the magnet lets a sensor report stopper position so the machine logic knows when pallets are held or released.