verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC TWG40 · Adjustable mounting height Stopper Cylinder

Airtac TWG Stop Cylinder TWG40X25SKF

Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X25SKF from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.

  • Stroke25 mm
  • StopperLever roller, adjustable oil cushion, self-lock
  • MagnetMagnet
  • ActionDouble acting
  • MountingFlange, adjustable mounting height
  • BoreØ40 mm
$115.35 $122.85Save 6%
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every TWG40 stroke, stopper and magnet on one page All TWG40 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac TWG Stop Cylinder TWG40X25SKF

Order code TWG40X25SKF builds the F self-lock into the TWG40 lever roller stopper cylinder. The cylinder itself is unchanged: Dia 40 mm bore, double acting, 25 mm stroke chosen from the 20/25/30 mm range, and a flange whose mounting height is adjustable on the machine.

With F fitted, the lever cannot spring back and push the stopped load backwards, which matters where a box or pallet must stay parked after impact. The S magnet supports sensor position checks, the PT1/8 port takes air at 0.15-1.0 MPa, proof pressure is 1.5 MPa (215 psi), and the fluid should be filtered by a 40 um element.

Airtac TWG Stop Cylinder TWG40X25SKF Technical Specifications

Order codeTWG40X25SKF
ProductAdjustable mounting height Stopper Cylinder
Stroke25 mm
StopperLever roller, adjustable oil cushion, self-lock
MagnetMagnet
ActionDouble acting
MountingFlange, adjustable mounting height
BoreØ40 mm
Strokes20, 25, 30 mm (+1.0/0)
PortPT1/8
Stopper typesRound rod, Flat rod, Roller, Lever roller, adjustable oil cushion
FluidAir (filtered by 40 µm element)
Operating pressure0.15-1.0 MPa
Proof pressure1.5 MPa (215 psi)
Temperature-20 to +70 °C
CushionBumper
LubricationNot required

Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.

How to choose

Choose TWG40X25SKF over TWG40X25SK when the stopped pallet must stay put, because F adds the self-lock that stops the lever springing back. Without that need, TWG40X25SK gives the same lever roller and adjustable oil cushion with magnet. A roller head (TWG40X25SR) or plain rods (TWG40X25C, TWG40X25B) suit simpler stops. Strokes of 20 mm and 30 mm are coded TWG40X20SKF and TWG40X30SKF on the same Dia 40 flange body.

Applications

pan_tool

Park-and-hold stop station

The F self-lock keeps the lever from springing back, so a stopped box stays parked while a labeler or printer works on it.

packaging

Accumulation on packaging lines

Double acting control of the Dia 40 bore stopper queues containers at an infeed without the load being pushed backwards after impact.

sensors

Monitored stop with magnet

The S magnet supports position sensing, confirming the 25 mm stroke has fully raised or lowered before the next machine cycle starts.

FAQ

What exactly does the F option change on the TWG40X25SKF?

F is the self-lock option for the lever roller stopper. It stops the lever from springing back after impact, so the lever does not push the stopped load backwards once the pallet or box has been caught.

What are the key figures of the TWG40X25SKF?

Double acting, Dia 40 mm bore, 25 mm stroke from the 20/25/30 mm range, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, lever roller with adjustable oil cushion plus self-lock, magnet fitted, filtered air through a 40 um element, no lubrication needed.