Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG40X30R from the TWG40 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
The AirTAC TWG40X30R is a double acting stopper cylinder from the TWG series with a Dia 40 mm bore and a 30 mm stroke (tolerance +1.0/0 mm). Its roller stopper, selected by the R code in the ordering table, lets a passing pallet, box or workpiece ride over the stop face instead of dragging across a fixed rod, which reduces scuffing on conveyor surfaces. The flange mounts with an adjustable mounting height, so the stop position can be set exactly where the line needs it.
This code carries no magnet, so it is the mechanical stop only; if you later need position feedback, the neighbouring TWG40X30SR adds the S magnet for sensors. Air raises and lowers the stopper through the PT1/8 port across the 0.15-1.0 MPa operating range, and the series needs no lubrication.
| Order code | TWG40X30R |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 30 mm |
| Stopper | Roller |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø40 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Pick TWG40X30R when loads on the line should roll over the stop rather than press against a fixed rod. Choose TWG40X30SC for a round rod contact face, TWG40X30SB for a flat rod face, or the lever roller K code with the optional adjustable oil cushion when a softer stop is required. Add S to the code if sensor feedback is needed; this R version has no magnet.
AirtacDistr lists every TWG40 order code with its price on one page at https://airtacdistr.com/products/airtac-twg40-stopper-cylinder
The roller stopper lets incoming pallets roll onto the stop face, suiting accumulation sections where loads should not slide against a fixed rod.
Use the adjustable mounting height flange to set the Dia 40 stopper at the correct stop point on mixed-height conveyor lines running 0.15-1.0 MPa air.
At divert and merge stations, the roller face presents a moving contact so cartons are stopped with less dragging across the conveyor surface.
Dia 40 mm bore, 30 mm stroke (+1.0/0 mm tolerance), double acting, roller stopper, no magnet, flange with adjustable mounting height, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no lubrication required.
No. This code has no magnet and no self-lock; the F self-lock option applies only to the lever roller stopper. For a magnet on the same roller stopper, order TWG40X30SR.