
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X20K from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWG50X20K selects the K stopper option in the AirTAC TWG ordering table: a lever roller end fitted with an adjustable oil shock absorber. On the Dia 50 mm bore with 20 mm stroke, the roller rolls the incoming load onto the lever and the oil cushion bleeds off impact energy, so pallets and workpieces are brought to rest more gently than on a fixed rod stopper.
The cylinder is double acting on a flange with adjustable mounting height, running on air filtered by a 40 um element at 0.15 to 1.0 MPa. Port size is PT1/8, proof pressure is 1.5 MPa (215 psi), the temperature range is -20 to +70 C, and no lubrication is required. Like all plain TWG codes it carries no magnet, so the S suffix would be needed for position sensing.
| Order code | TWG50X20K |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
Choose TWG50X20K over TWG50X20C (round rod) or TWG50X20B (flat rod) when the arriving load is fast, heavy or delicate and needs a softer, rolling contact; the catalog sizing approach is to match the Dia 50 bore to the impact load and speed charts. The K lever stops at the end of the oil cushion travel but can spring back and push the load backwards, so order TWG50X20KF if that reverse push must be prevented with the F self-lock. TWG50X20R gives a roller without the oil cushion, and TWG50X20S adds the magnet this code omits.
The roller rolls arriving pallets onto the lever while the adjustable oil shock absorber absorbs the impact, letting one Dia 50 mm stopper hold a queue without hard jolts.
At packaging machine infeeds the cushioned lever brings cartons to a stop softly, with the 20 mm stroke lowering the stopper below the product line between cycles.
The oil cushion is adjustable, so the stop can be tuned per line speed within the 0.15-1.0 MPa supply range, and the flange height is set to match the conveyor rail.
Dia 50 mm bore, 20 mm stroke (+1.0/0 mm), double acting, flange mount with adjustable height, lever roller stopper with adjustable oil cushion, PT1/8 port, 0.15-1.0 MPa operating pressure, 1.5 MPa (215 psi) proof pressure, -20 to +70 C, bumper cushion, no magnet, no lubrication required, 40 um air filtration.
No. The catalog notes that the lever on the K version can spring back and push the stopped load backwards; that behavior is what the F self-lock option removes. If the load must not be pushed back, order TWG50X20KF, which adds the self-lock to the same lever roller and oil cushion arrangement.