
Genuine AirTAC adjustable mounting height stopper cylinder, order code TWG50X20KF from the TWG50 range. The options this code selects are decoded below; series data follow the official AirTAC catalog.
TWG50X20KF combines the two lettered options at the end of the AirTAC TWG ordering code: K, the lever roller stopper with adjustable oil cushion, and F, the self-lock. The self-lock stops the lever from springing back, so the load stopped by the cushioned lever is not pushed backwards after it comes to rest on the Dia 50 mm bore cylinder.
The unit is double acting with a 20 mm stroke (+1.0/0 mm tolerance) on a flange whose mounting height is adjusted to the line. It runs on air filtered by a 40 um element at 0.15 to 1.0 MPa, ports are PT1/8, proof pressure is 1.5 MPa (215 psi), temperature spans -20 to +70 C, and lubrication is not required. No magnet is fitted under this code, so external switching or the S suffix applies.
| Order code | TWG50X20KF |
|---|---|
| Product | Adjustable mounting height Stopper Cylinder |
| Stroke | 20 mm |
| Stopper | Lever roller, adjustable oil cushion, self-lock |
| Magnet | No magnet |
| Action | Double acting |
|---|---|
| Mounting | Flange, adjustable mounting height |
| Bore | Ø50 mm |
| Strokes | 20, 25, 30 mm (+1.0/0) |
| Port | PT1/8 |
| Stopper types | Round rod, Flat rod, Roller, Lever roller, adjustable oil cushion |
| Fluid | Air (filtered by 40 µm element) |
| Operating pressure | 0.15-1.0 MPa |
| Proof pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70 °C |
| Cushion | Bumper |
| Lubrication | Not required |
Source: AirTAC Products Catalog 2026A (PDF01-P0756..P0757), TWG series specifications and ordering code.
TWG50X20KF is the code to specify when a soft stop and a hold are both needed: it is the same lever roller and adjustable oil cushion as TWG50X20K, plus the F self-lock against lever spring-back. If your load tolerates a firm stop and spring-back is not a risk, TWG50X20C (round rod), TWG50X20B (flat rod) or TWG50X20R (roller) are the simpler siblings; all share the 20 mm stroke and PT1/8 port on the Dia 50 bore. For position sensing choose TWG50X20SFS equivalents with the magnet suffix, since this code has no magnet, and TWG50X25KF or TWG50X30KF give more lift.
Pallets roll onto the lever and decelerate in the adjustable oil cushion, then the self-lock keeps the lever down so the stopped pallet is not pushed backwards.
Where loads arrive fast at a transfer station, the cushioned lever softens the impact on the Dia 50 mm cylinder and the F lock holds the position until the next air signal.
The self-locked lever gives a repeatable rest position for workpieces fed to machining stations, with the flange height adjusted to the fixture and 0.15-1.0 MPa supply.
Dia 50 mm bore, 20 mm stroke (tolerance +1.0/0 mm), double acting, flange mounting with adjustable height, lever roller stopper with adjustable oil cushion and F self-lock, PT1/8 port, operating pressure 0.15-1.0 MPa, proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, bumper cushion, no magnet, no lubrication required, 40 um filtered air.
The stopper hardware is identical to the K option: a lever roller with an adjustable oil shock absorber. The F option adds the self-lock mechanism, which prevents the lever from springing back and pushing the stopped load backwards. Ordering TWG50X20KF therefore means you get the same soft, rolling stop plus a held lever position; confirm the exact mechanism detail from the datasheet.